44 replies to this topic

[vectra666]

Sorted the buttons out, I incorrectly typed the button numbers in. Next minor problem is, I've done all the masking and it's looks good apart from three top right I just can't get right. Then onto the reel parts then complete.

[vectra666]

Right all lamps are masked correctly and work fine.
Now this layout Works in both mfme's 9.4-10.1 but in 10.1 there's no sound or its very quiet and in 9.4 there's sound but the lamps appear to light up oddly in various places when on the feature board, now can anyone tell me if this happens on the original layout of this or am I imagine it.
Cheers

[banditboy2006]

send me the layout later vecs for me to try

[fuzion]

Right all lamps are masked correctly and work fine.
Now this layout Works in both mfme's 9.4-10.1 but in 10.1 there's no sound or its very quiet and in 9.4 there's sound but the lamps appear to light up oddly in various places when on the feature board, now can anyone tell me if this happens on the original layout of this or am I imagine it.
Cheers

 

Check your main computer volume.  Might not be the case but if you've loaded any Scorp4 machines it seems to change the main volume on my computer.  Lamps behave oddly in both 9.4 and 10.1, though 10.1 is better for MPU5 machines.

 

J

[vectra666]

Thanks fir the info fuzion the sounds fine in 9.4 but nowt in 10.1, but I'll turn lappy volume right up lol. Also need to check the vamp logo as its supposed to stay on during the feature boards but don't at moment, who said dxing was easy never gets any easier as you go on.