robert60574

Solved just had to change SR5i to Rooting plug mode FROM ...EEPROM mode (factory programmed sorting configurations) 

 

Now diverting as it should do ...

 

Thanks for all your feedback and help guys

ok got my quiz SR5i WORKING YEAH.....This is what i did Found instruction manual on net

 

Put the routing plug out of the original mech into the working replacement?

i have replaced the routing plug from original ..... 2 of the coin mech work no problem diverting coins but will not accept £1 coins ... it the other one that i was told is out of a quiz machine that wont divert even with routing plug in 

firstly, keep the one that accepts all the coins, regardless of where its diverting them to... 
 
now, on the side are 2 plugs, there should be 2 plugs in them. these 2 plugs have wires coming out of them. usually ones white and it connected to the machine mpu (i think) and the other one has black and another colour (I think purple sometimes) but those wires go back into the plug. Are they there????
 
if they are plugged in fine, you will need to search for a manual that tells you what pins you need to put in the plug. It's an 8 connector plug and it should say 'diverter' on the coin mech. 
 
I have personally done this before when with a bell fruit machine, so its not overly hard to do
 
edit: the one with the wires going back in itself is the routerplug, like chas says- do try that first before doing what I said

i am told that the coin mech that wont divert the coins is programmed wrong ..(it came out of a quiz machine not a rio cabinet ) does a flashing red and green light on coin mech mean faulty???