Jump to content


Display wiring for Spin N Tonic Epoch

  • Please log in to reply
1 reply to this topic

#1 Webbaldo



  • New Members
  • 1 posts

Posted 05 August 2021 - 07:14 AM

How do,


Recently I gained a free 'Spin and Tonic' Impulse/Maygay epoch based machine and kinda working, circa 2002.


Oddly, the Epoch side of things is fine, I've replaced the main board battery and intend keeping the machine alive as a donor-in-waiting for when my simpsons machine eventually dies.


Anyway, it never came with a 16 digit display (and the wiring for the display was missing from the loom as well). Assuming it was robbed before I got the machine, ironically the rest of the machine is complete and working.


Despite looking at epoch manuals I can't seem to find the basic answer.


Firstly, does the Spin n tonic, use the dot matrix 16L102DA4 or the normal 16LF01UA4 kind? Secondly, any idea where the actual display plugs into? Is it the reel board or epoch board etc?


I can then look for a suitable cable, based on that.


Many thanks for any help!

#2 Johnnyafc



  • Layout Creator
  • PipPipPipPip
  • 1587 posts

Posted 13 August 2021 - 01:18 PM

Try over at https://www.desertislandfruits.com/or the Mecca https://www.fruitemu.co.uk/ or dads https://dadsfme.com/index.php FME this place is dead  :jimlad:

Edited by Johnnyafc, 13 August 2021 - 01:18 PM.

Posted Image

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users