Jump to content


Photo

{Scorpion 5}Betcom - Bank Job - Going for Gold


  • Please log in to reply
9 replies to this topic

#1 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 04 April 2017 - 10:53 AM

File Name: Betcom - Bank Job - Going for Gold

File Submitter: Matty.N

File Submitted: 04 Apr 2017

File Category: Scorpion 5


***USE IN MFME 6.0 OR ABOVE***
 
Starting off, this machine utilises red LEDs on the reels, but in order to get them working i've had to use a red overlay as the standard lamps, you'll notice this on boot up, however once you get red reels during game play (the number trail turns red) after you lose the red trail the overlay will reset & they'll work as normal.
 
Thanks to Reg for the MFME Font which can be downloaded here - http://www.desertisl...e/55-mfme-font/
Wizard for MFME 6.1 allowing this machine to run that little bit better.
 
Any problems/feedback please don't hesitate to let me know, so have fun!


Click here to download this file



#2 ricardo de ponsa

ricardo de ponsa

    Man Of Science

  • Regulars
  • 1110 posts

Posted 04 April 2017 - 02:48 PM

Thanks to everyone involved in this release. :)


Don't come round and steal my Cheerios !!!!


#3 westy20040

westy20040

    Layout Designer

  • Regulars
  • 680 posts

Posted 04 April 2017 - 05:00 PM

Thank you :)



#4 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 04 April 2017 - 05:35 PM

thanks for this and i've sorted out the red lamp problem 

what i did (as snakes n ladders is the same) was copy what westy20040 did on their previous layout regarding the "red" lamp and when the machine starts the reels are lamped white then they turn red when they should and vice versa

heres the red mask used thanks to westy20040 for the mask

 

then again i could be wrong lol

Attached Files


Edited by vectra666, 04 April 2017 - 05:39 PM.

The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#5 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 04 April 2017 - 05:41 PM

Can you upload the layout with it like that? As when I had my masks arranged like that they were white when supposed to be red and red when supposed to be white.



#6 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 04 April 2017 - 05:46 PM

no worries yours is correct even if it looks wrong lol so i swapped em back around lol i'll pm you my wip snakes you'll see what i mean


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#7 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 04 April 2017 - 05:48 PM

Reading your post back i see what you mean.

 

The reels aren't always red, only when the trail turns red. The way i've done it once you've gotten a red trail & had a feature/pay off the reels will switch back to white, until they turn red again & they work as intended.


Edited by Matty.N, 04 April 2017 - 05:49 PM.


#8 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 04 April 2017 - 05:51 PM

Reading your post back i see what you mean.

 

The reels aren't always red, only when the trail turns red. The way i've done it once you've gotten a red trail & had a feature/pay off the reels will switch back to white, until they turn red again & they work as intended.

unless this particular machine when it starts up i'e initializes for the first time in mornings say, the reels automatically start off red but reset during play  


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#9 andy-1

andy-1

    Layout Creator

  • Layout Creator
  • PipPipPipPip
  • 1987 posts

Posted 04 April 2017 - 07:56 PM

Thank You



#10 Geddy

Geddy

    Banned

  • Banned
  • 3433 posts

Donator

Posted 05 April 2017 - 12:14 PM

Cheers






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users