don,t know what the code was about just pressed start button and it went and started initialising code now says AAA00000 .
there's no battery damage on the main or the game card as that's a brand new one.
The roms chips are fine now if the labels were the correct way around they would've been in correctly in the first place. maybe an idea the machine companies could implement like batteries with the + ,- .
Manufacturers already show you which way round most chips should go, hence the cutout at one end.
As for no images of the actual board there is on my other topic regarding the Rtc error99.
So people are expected to trawl your other posts to try and get the stuff they need to be able to help you? All problems with one machine, should ALL be in one post, that way it's much easier to keep track of what's going on and makes being able to help so much less difficult.
There isn't even a link to it in this post.
The Psu issue has been addressed on page1 of this topic
Has it? I thought you were still waiting for the replacement PSU to see if it made any difference? At least that's what you say in the last line of this post.
I'm no expert in anything especially electronics and real internal workings of fruit machines.
This is self evident
The alarm is only when the top door is open so not a problem.
Oh right, the 'Grrrrrr' that you wrote, makes it look like it was a problem for you
Again we'll wait and see if the Psu powerpack is the problem when it arrives, and the new set of £70roms
This is the comment I referred to higher up, when you said the problem had been addressed.
If when it arrives it cures the problem, my guess is, that simply reflowing the solder on the joints where the power plug, plugs in would have cured it, this happens so many times on so many machines, it's quite a well know and common problem nowadays. I'd have taken fruitmans advise first before spending money on it. If the PSU is already knackered, then what did you have to lose?