I've just unplugged and replugged in the matrix display and now it wont stop with the hey check it out alarm and the screen no longer works
Any ideas?
Barcrest "Hey Check It Out"
Started by westerndevon, Oct 02 2014 10:46 PM
5 replies to this topic
#1
Posted 02 October 2014 - 10:46 PM
#2
Posted 03 October 2014 - 07:51 PM
So I've managed to get the alarm to stop and all the lights on all the boards are flashing as they should the only prob is the alpha display no longer works?
Where's the cheapest place to get a quick replacement?
Where's the cheapest place to get a quick replacement?
#3
Posted 03 October 2014 - 08:50 PM
Part number is VAF1613-12LSR
Found one on eBay but it's a VAF1613-12LSR8, are these one in the same or not?
Found one on eBay but it's a VAF1613-12LSR8, are these one in the same or not?
#4
Posted 03 October 2014 - 10:45 PM
Part number is VAF1613-12LSR
Found one on eBay but it's a VAF1613-12LSR8, are these one in the same or not?
It's probably the same, the 8 on the end may well just be the revision number.
Might be easier to confirm with pictures.
Do the connectors/pins match?
#5
Posted 05 October 2014 - 08:50 PM
that alarm always s****s me up ha ha
#6
Posted 06 October 2014 - 10:16 AM
It's probably the same, the 8 on the end may well just be the revision number.
Might be easier to confirm with pictures.
Do the connectors/pins match?
The pins are exactly the same, (12 pin with no.6 missing) It should be here in a day or so then can try it
If its not the alpha display then with try and get hold of a spare* lead that connects to the MUX
Hoping won't need a whole nw MUX board
*anybody got a spare kicking about I can borrow just to test it?
Edited by westerndevon, 06 October 2014 - 10:16 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users