Hi guys,
I've got a DOND Big Reds, and the coin mech in it (A cashflow 9524Xe) didn't take many coins, about 1 in 20, so I replaced it for a Cashflow 126.
I've got it installed inside the machine, but it isn't taking any coins at all. If i put coins in the mech with the machine door open, the LED on the mech flashes 4 times, which the manual says "Coins recognised, but not accepted due to inhibit setting".
I've made sure that the software isn't set to inhibit coins in the Bacta test screen. I don't think there are any inhibits set on the mech itself... I don't know where to go from here?
Also the machine label inside says that only a serial acceptor will work. Is the 126 a serial acceptor? The serial plug does fit into what looks like a serial port at the bottom, just by the sorter.
Another thing is that I don't seem to have a route-inhibit connector plug inside the machine. Is this what the acceptor wants before it will work?
Cheers!
Edited by FruitBash, 05 June 2014 - 11:54 AM.