Jump to content


Photo

RED HOT X error code


Best Answer nails, 10 June 2014 - 06:56 PM

well, kinda was true but it turns out it was the red on/off switch at the back giving a bad connection - hence the reset and the machine clearing via the tamper option.

 

a bit of wd40 of the switch and a wipe and all hunky dory.

Go to the full post


  • Please log in to reply
2 replies to this topic

#1 nails

nails

    The furniture

  • Regulars
  • 4578 posts

Posted 04 June 2014 - 07:36 AM

ive got a red hot x that shows error code 48 on startup and wont clear. fine in door open mode.

 

do I have to clear the ram or something ?

 

 



#2 captainhaddock

captainhaddock

    Layout Designer

  • Layout Creator
  • PipPip
  • 740 posts

Posted 04 June 2014 - 08:13 AM

that's the on/off alarm - see below :)

 

"On/Off Tamper Alarm...An audible alarm sounds for 10 seconds then silent for up to 2 minutes.  To clear this alarm keep the machine closed and switched on for 10 minutes to erase recorded resets."

 

Dave.



#3 nails

nails

    The furniture

  • Regulars
  • 4578 posts

Posted 10 June 2014 - 06:56 PM   Best Answer

well, kinda was true but it turns out it was the red on/off switch at the back giving a bad connection - hence the reset and the machine clearing via the tamper option.

 

a bit of wd40 of the switch and a wipe and all hunky dory.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users