Jump to content


Photo
- - - - -

Sticky Buttons


  • Please log in to reply
15 replies to this topic

#1 tobybennett

tobybennett

    Junior Member

  • New Members
  • 22 posts

Posted 09 February 2010 - 07:02 PM

Hiya,

Bought a second hand machine today, and has a bit of a sticky hold and cancel button. Any immediate solutions to fix this?
I've tried taking the buttons off, but to no avail.

Cheers
Toby

#2 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 09 February 2010 - 08:09 PM

Disconnect the loom by locating the clasp and pulling away from the button rear.

Behind the button is a mechanism that you 'pinch' to get out (White in the image)....

Pinch the pins together (but mind the spring don't shoot out)

Warm soapy water and replace...

Attached Files

  • Attached File  pins.JPG   49.62KB   10 downloads


#3 Guest_barcrest junky_*

Guest_barcrest junky_*
  • Guests

Posted 09 February 2010 - 08:31 PM

Disconnect the loom by locating the clasp and pulling away from the button rear.

Behind the button is a mechanism that you 'pinch' to get out (White in the image)....

Pinch the pins together (but mind the spring don't shoot out)

Warm soapy water and replace...


Wear gloves:oh:

#4 money-maker

money-maker

    Junior Member

  • Regulars
  • 74 posts

Posted 09 February 2010 - 08:37 PM

Hiya,

Bought a second hand machine today, and has a bit of a sticky hold and cancel button. Any immediate solutions to fix this?
I've tried taking the buttons off, but to no avail.

Cheers
Toby

just spray polish down the outside of the buttons + hey presto instant result!!!

#5 tobybennett

tobybennett

    Junior Member

  • New Members
  • 22 posts

Posted 09 February 2010 - 10:52 PM

Cheers! Did it with some WD40 in the end. Worked a treat.

Don't know why, but I had some trouble getting the white clasps to release the button... so I didn't.

#6 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 09 February 2010 - 11:00 PM

Cheers! Did it with some WD40 in the end. Worked a treat.



it will for the mo

give it a few months & it will cease up as the WD makes it sticky & dust will gather

#7 richy76

richy76

    Member

  • New Members
  • PipPip
  • 403 posts

Posted 09 February 2010 - 11:08 PM

The see through covers can also be prized off for cleaning around the edges, be careful though the can crack.

#8 tobybennett

tobybennett

    Junior Member

  • New Members
  • 22 posts

Posted 09 February 2010 - 11:13 PM

The problem is on a few of the other buttons is that they dont necesarily stick but they feel slightly dampened, and don't have that same 'click' feel as the other buttons. Does this mean I need to take the button to bits?

As I said before, it seems impossible to get the white part out of the button housing.

#9 Guest_tommy c_*

Guest_tommy c_*
  • Guests

Posted 09 February 2010 - 11:47 PM

The problem is on a few of the other buttons is that they dont necesarily stick but they feel slightly dampened, and don't have that same 'click' feel as the other buttons. Does this mean I need to take the button to bits?

As I said before, it seems impossible to get the white part out of the button housing.

It could be the micro switches are going on them certain buttons proberbly someones been giving em a good crack and thats why they don't seem to click or sound same as the others.

#10 DeJaVu

DeJaVu

    Junior Member

  • New Members
  • 11 posts

Posted 10 February 2010 - 10:51 AM

ya :jiggy:
If not to bad... bit of flash n a stiff brush.. if there bad... Run a blade around the edge.. if there very very bad.... ya may aswell take all buttons out and clean each one and check m-switches... Nice...
"Take-it-easy & Enjoy"
DeJaVu

#11 tobybennett

tobybennett

    Junior Member

  • New Members
  • 22 posts

Posted 10 February 2010 - 11:07 AM

Has anyone got any new barcrest mpu5 buttons, with new micro switches by any chance? Dont really mind what scheme they are.

Cheers
Toby

#12 roderz

roderz

    <--+-->

  • New Members
  • Pip
  • 222 posts

Posted 10 February 2010 - 12:26 PM

To remove some switches you simply turn them slightly and they drop out,

I'd just pop off all the top lenses, remove button decals and take the complete button assembly's out and stick em in a pillow case a wack em in the washing machine!

Believe me it works and it's quick when you got 30 machines to do!!

#13 pimpalicious

pimpalicious

    Junior Member

  • New Members
  • 60 posts

Posted 10 February 2010 - 11:42 PM

How did they get sticky in the first place?!

Pimp

#14 wildcat

wildcat

    Junior Member

  • Regulars
  • 36 posts

Posted 11 February 2010 - 12:38 AM

How did they get sticky in the first place?!

Pimp


beer spilt in em, as it drys it goes sticky!

#15 tobybennett

tobybennett

    Junior Member

  • New Members
  • 22 posts

Posted 11 February 2010 - 11:15 AM

beer spilt in em, as it drys it goes sticky!


Most likely!

#16 roderz

roderz

    <--+-->

  • New Members
  • Pip
  • 222 posts

Posted 11 February 2010 - 11:45 AM

How did they get sticky in the first place?!

Pimp


Depends how exciting the game is :twitcy:




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users