There is a bugs in the Pinball Fever Classic by DAD.
I them when just after the first 2 spins I got 2 nudges once moving the reels, it stop still flashing 1 nudge left and all 3 hold buttons flashing, also I got a gamble on trying again and was unable to increase the win, any ideas?
Theres no sound either!
John.
2 replies to this topic
#2
ady
-
- Moderators
-
- 14204 posts
The furniture
Posted 13 January 2004 - 12:23 PM
Are you using the v2.41? If you use the v1.46 it works fine....
#3
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 13 January 2004 - 04:15 PM
Right here goes:
I mentioned in the release thread at PR and FF that the classic is mute, however Pook pounted out that you can use the sound roms from Pinball Wizard as they are a close match.
Adydb is correct, If you run the classic without sound you should use JPEmu v1.46 because the newer version v2.41 doesn't like to run layouts without a sound rom, and will cause the lockup as you've already experienced.
There is one minor bug however - the first green lamp which says +2 should be +1 - apologies for missing that one.
Hope this helps.
DAD
I mentioned in the release thread at PR and FF that the classic is mute, however Pook pounted out that you can use the sound roms from Pinball Wizard as they are a close match.
Adydb is correct, If you run the classic without sound you should use JPEmu v1.46 because the newer version v2.41 doesn't like to run layouts without a sound rom, and will cause the lockup as you've already experienced.
There is one minor bug however - the first green lamp which says +2 should be +1 - apologies for missing that one.
Hope this helps.
DAD
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
