23 replies to this topic

[lincs1]

ok guys.. this is my update...

when the machine turns on now.. it looks perfect no alarms but... always a but isn't there.. lol
The coins just go straight through to the colletion tray ive tried every coin and they all just get rejected?? Any advice?

as i have stated kelly the mech or the separator is blocked with coins

you need to clear the obstruction first before it'll accept again.

also check the inline fuse on the mech loom



hope this helps


lincs1

[skabaz]

yeah

with the machine switched OFF take the mechanisim that the coins go through out of the machine(if you have to pull any plugs out remember exactly how they go back in!!!)

there will be coins stuck inside the mechanism(it will either say mars 126,sr5 or 435 on it)

you have to make sure all coins have been removed before you connect it all back up.

if you have definitly removed all coins or absolutly no coins were in the coin mech then you have a faulty coin mech.

baz

[kellypres]

guys...

thank you thank you thank you..

I'm up and running again.

You were right.. of course.

I took out the mechanism and there was 2 £1 coins stuck in there. It's now working absolutly fine.

Thank you again so much!!!

[skabaz]

nice one:)

baz