23 replies to this topic

[kellypres]

Please be kind, im new..

How do you stop alarm 48. On off alarm.
I have Bells fruit machine monopoly

[ady]

http://www.fruit-emu...arm-48-off.html

Might be a reply here, not read it though ..............


Please be patient!

[cardie]

Please be kind, im new..

How do you stop alarm 48. On off alarm.
I have Bells fruit machine monopoly

it means memory clear

either youve got a dodgy battery or iits been tinkerd with

leave it with the alarm going it should go off after 15 seconds then the error code will go off after 30 seconds

then it should bee fine hope this helps

[lincs1]

it means memory clear

either youve got a dodgy battery or iits been tinkerd with

leave it with the alarm going it should go off after 15 seconds then the error code will go off after 30 seconds

then it should bee fine hope this helps

alarm 48 is nothing to do with the battery m8, alarm 48 is where the machine has been swtich on/off then on again within a certain time limit


but u do have the right idea about leaving the machine on while in alarm and it will clear roughly about 20 30 secs later

if it was the battery it would come up as error alarm 53 (meaning memory reset)

lincs1

[skabaz]

also make sure both doors are closed and once the error has cleared put a coin through it or it will start up again when you open the doors.

baz

[skabaz]

four kind responses,just what you wanted.

please reply back if it was any help:)

baz

[kellypres]

thanks i'll try that in the morning and let you know if that works.... thatnks for all your advice. kelly

[lincs1]

thatnks for all your advice. kelly

no problem kelly always like to help a lady in distress

[aaamusements]

And always nice to see a polite first post.
Welcome to the forum!

[kellypres]

hi there.

So.. i let the alarm go on and it did stop but then another alarm came on saying coin mech err 10. i let that stop but now it wont take any coins??

Sorry everyone but i need help sorting this one out now...

Thank you

[lincs1]

hi there.

So.. i let the alarm go on and it did stop but then another alarm came on saying coin mech err 10. i let that stop but now it wont take any coins??

Sorry everyone but i need help sorting this one out now...

Thank you

sound like u got a coin jam kelly, either in in the mech itself or in the separator.


what ever u do do not take the separator apart (its a nightmare to put back together) coz the gates will go everywhere.

just take the mech out and bang it a few times

[aaamusements]

And while you are at it check the on board battery just in case, if there is any sign of leakage then remove it - and if it is a blue Nicad then remove it whether it is leaking or not!

[lincs1]

if it is a blue Nicad then remove it whether it is leaking or not!

i don't fully understand this aa.


if its not leaking there wouldn't be any need to remove it. if it looks ok then i wouldn't touch it m8.



lincs1

[aaamusements]

You must have seen the damage that just vapour from a Nicad can do?

At least with a nimh battery you can usually see when it is leaking.

[lincs1]

You must have seen the damage that just vapour from a Nicad can do?

At least with a nimh battery you can usually see when it is leaking.

i have been working with machines for over 25 years i have seen many vapour leaks ect from nicads ect. but unless the vapour is appearing under the tracks there would be no panic or alarm to remove it m8.



lincs1

[aaamusements]

i have been working with machines for over 25 years i have seen many vapour leaks ect from nicads ect. but unless the vapour is appearing under the tracks there would be no panic or alarm to remove it m8.



lincs1

I don't agree, but I respect your opinion as someone who has been working on fruits for longer than I have!

I would still argue that there is a reason why they haven't fitted nicads for a few years, and it wasn't just RoHS compliance...

[lincs1]

I don't agree, but I respect your opinion as someone who has been working on fruits for longer than I have!

I would still argue that there is a reason why they haven't fitted nicads for a few years, and it wasn't just RoHS compliance...

ok m8 u win i'm not gonna argue on this. lifes to short for discrepencies


END OFF


links1

[ady]

if it was the battery it would come up as error alarm 53 (meaning memory reset)

lincs1

Yup, and how thankful I was when I posted that question before, and you replied as above then............2mins felt like a long-long time!

[todd1970]

ok m8 u win i'm not gonna argue on this. lifes to short for discrepencies


END OFF


links1

Naw...dont end it now fight him some more :tongue:

[kellypres]

ok guys.. this is my update...

when the machine turns on now.. it looks perfect no alarms but... always a but isn't there.. lol
The coins just go straight through to the colletion tray ive tried every coin and they all just get rejected?? Any advice?