
Reset
Started by Chris_010292, Jun 10 2007 11:10 AM
34 replies to this topic
#21
Posted 13 June 2007 - 05:12 PM
right to get into super tests do i go into normal tests and hold cancel and start or just open the door and then do it.
#22
Posted 13 June 2007 - 05:24 PM
you can try the holding down of one test button press the second one but still hold on to the first the press the second one again or at test 9.1 keys hold cancel and press the exchange or transfer button to go into test 10.1 10.2 ect this is for bellfruit as your machine dose not have any xtra test setting
if there is any on epoch which would be a bloody first video it from start to finish i would love to see this which must inclued the power on all time mpu running front and inside of the machine all singing and dancing, i will be having a game of fist and punch with someone that trained me with the epoch system
if there is any on epoch which would be a bloody first video it from start to finish i would love to see this which must inclued the power on all time mpu running front and inside of the machine all singing and dancing, i will be having a game of fist and punch with someone that trained me with the epoch system
.._-=It`s not a problem only a challenge =-_..
#23
Posted 13 June 2007 - 05:51 PM
Right I see, I strongly appologise for being so thick but I have tried putting the dil switch on, but it makes no difference to my machine in any way, is there anything else I could try, cheers, you don't know how much I appreciate your help.
#24
Posted 13 June 2007 - 08:28 PM
any ideas?
#25
Posted 13 June 2007 - 08:36 PM
Have you eaten all the Dills?? If you have then I don't know what else to suggest...
J<br /><br /><br /><br />A man
#26
Posted 13 June 2007 - 08:43 PM
i take it you have tryed these in the off setting as well
extreme gaming 2002/3 the set up was always full refill menu thinking about it now sorry this the machine with the nice cartoon girls on it
extreme gaming 2002/3 the set up was always full refill menu thinking about it now sorry this the machine with the nice cartoon girls on it
.._-=It`s not a problem only a challenge =-_..
#27
Posted 13 June 2007 - 08:45 PM
Lol, I switched dil 6 on, this didnt make any difference and I looked in the manual and for some reason that stated that if the switch is on or off nothing will happen because the manual has nothing in the two boxes "on and off", pretty strange, there must be something else I could do?
#28
Posted 13 June 2007 - 08:58 PM
yeah, yeah thats the machine mate, ok dont worry atleast now i know, do u like my machine lol, and what is that strange little thing on the money controls bit where it sais something like "bank option", it is like a little dial you can rotate and is numbered 1 to 6 i think what will happen if i rotate the dial to number 2?
#29
Posted 13 June 2007 - 09:19 PM
i do like machine what i can remember we only had it on test at the time and remember the girls on and the little blond 1 with the flight attendet gear on and that lighting mask at the top when it fell to bits with all those led in it look after your machine as your part are getting rare each day if you can buy another psu,hopper driver pcb,epoch,I/O or lamp driver pcb thats the one when you open the machine it`s at the top facing you) good luck chris
can`t remember any of the feature`s sorry m8
can`t remember any of the feature`s sorry m8
.._-=It`s not a problem only a challenge =-_..
#30
Posted 13 June 2007 - 09:26 PM
cool, cool, I am guessing that that strange dial on the money control section which says something like "bank select" is for other types of money, or am I wrong, lol I must be, cheers mate.
#31
Posted 14 June 2007 - 08:08 AM
Any ideas guys?
#32
Posted 14 June 2007 - 11:14 AM
Shall I rotate the bank option to number 2 or something to see what happens, what do you guys recommend, cheers all, chris.
#33
Posted 14 June 2007 - 11:34 AM
I wouldn't recommend messing with it, I can post you the manual for the coin mech if you want it?
#35
Posted 14 June 2007 - 12:04 PM
Excellent, cheers mate.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users