Here we go... a few photos

The main board / roms, the reels (why?), the machine itself, and a piece of paper attached to the back of the machine, which is of no real use for my problem, but may be of use to others...

Comments etc, please

Oh, and if you can help with my problem... that'd be grand too

Sure, I'll do that.

How do I get it in the scanner without breaking it? ;-)

No, seriously - I'll get some photos, and of the board etc...

Sneaky: what a way with words you have lol.

Mine's set on 10/20p dual stake, and 90% for family and friends. When we had builders in recently, I must have accidentally knocked the switch down to 70%... don't know how that happened... heh.

Cheers

I'm guessing it's something to do with the DIP switches?

There's 2x banks of 8 switches on the EPOCH board, but no indication of what is what.

I bet one of those is the option there... but WHICH ONE?? lol.

Please help me.

I.

Hello dear friends...

After a few home modifications to my machine, I'm now in need of a little more help with my machine.

How can I alter the CashPot / Reserve levels? I did a RAM reset, but they stop at £250... can't find a way to do it in Test Mode either.

Also, my power-supply buzzes. Vibration-wise, from the transformer. i've opened it and lagged it which has eased it slightly, but it's still noisy... as is the speaker. It buzzes "in time" with the flashing security light on the front, near the refil key.

A nice mod for me, was to replace the refil keyswitch with a 3way switch, as it's used in the home... refil, normal, demo - without opening up.

If anyone can help, would be well pleased.

Thanks!

Anyone have one of these??

Cash (or paypal) waiting.

R.


Edit: er, preferably calibrated for £ sterling notes

Just to say - it's funny what 'experience' can show, as opposed to "official" knowledge. As for entering test mode (taken from the machine's manual direct from Maygay):

Initiating Test Mode
To enter test mode the machine must be turned on and the service door open. If the test switch is pressed once, the machine will enter test mode.

Then it goes on about buttons LH1 LH2 LH3 and RH1 RH2 RH3 etc. To start with, I figured that RH1-4 were REEL HOLD buttons - but since I saw some LH buttons, I guess they're just counted from the left (or right) by X number - (LH1 being the leftmost button, RH1 being the rightmost button etc.)

Nowhere in the whole of the manual does it tell you what the red and green buttons are for, nor the green button down below. And there's no single mention of the button on the EPOCH board itself.

Thanks for all your help folks...

And er... "thanks" for all your "help" Maygay manual.

R.



PS: Does anyone have an NV4 with serial loom going spare?

Ah yes, the button on the main PCB - I saw that, and wondered what it was for, and how it worked - press and hold, then press 'red'.

I'm sure it doesn't say that in the manual...

I will try that tomorrow.

Thanks!!!

Thanks for the info, Impact.

I actually found a helpful person at Maygay who has sent me a manual FOC - my EPOCH board says 'EPOCH' on it, which kinda gave away the game there - I should have looked more closely - and yeah, it has a 25 pin "computer" serial port on it.

That said, it also has a computer type RJ45 port on it labelled 'Comms Port' - any ideas for that one?

I do have another more worrying problem with the machine though...

I can't seem to enter test mode, change percentages, clear RAM etc - and it states the hopper is full. Sadly, the hopper is empty. I want to play it, and win £s, but I don't want to have to fill it with £s first. The only way I know to dump hopper is to use test mode. Which I can't get into.

Inside my cab there are 3 buttons - a red and a green inside the top (service) door - and a green inside the bottom (cash) door. The red one on the top makes a noise from the speaker when pressed - the others do nichts.

If ever I open either the top door or the bottom door, the machine enters "Demonstration Mode" - and it even tells me this through the speakers. But I WANT TEST MODE!!

Are there any tricks I'm missing here - as the manual 'procedure' doesn't seem to get me there either.


Ross.

Just got my shiny new (2nd hand) machine as a gift. Big gift.

Would like to add a note acceptor to it - but with no manual, I'm not sure which one I need!!

Also, would like to know what system the machine uses - they seem to be quite different to the MPU3s and MPU4s I was used to back in the day...

And if anyone knows where I can get a manual for the machine, I'd be well chuffed too!!

Thanks