Jump to content


Photo
- - - - -

Scorpion 4 manual / coin mech help


  • Please log in to reply
3 replies to this topic

#1 mrrix

mrrix

    Newbie

  • New Members
  • 78 posts

Posted 29 May 2018 - 08:30 PM

If anyone has a manual for this please send me would be much appreciated. I have cash flow 126 no power light to it and not accepting any coins (tried 2 mechs) think it should have 12v to it as cash flow manual states this, but its reading 4.4v so need to see what main board should have and be supplying. Probably need new main board but if anyone has had this or knows which area I should be looking into then it would help a lot

#2 mrrix

mrrix

    Newbie

  • New Members
  • 78 posts

Posted 01 June 2018 - 10:15 PM

Ok so for those who are interested or for anyone who has similar problem, my main board is ok. All green lights were on BUT do not believe this. Managed to get scorpion 4 manual from a friend with deal or no deal and have the voltages supposedly to the main board. 13.5v were reading 5 volts so got busy with multimeter and worked out sanken psu was supplying these voltages. Removed the big plug from sanken psu voltage checked and pins 11 & 12 read 5v. Changed pins from plug as pins on psu 6-10 app read 12.5v so moved red cables from plug to pins 7-10 so all 13.5 volts main board required were supplied and bang perfect. Green light on mech and all working. Maybe previous owner (who apparently replaced psu) messed something up or maybe psu not working right but either way a simple volt check on psu and main board solved problem. Will upload link for scorpion 4 dond manual in few days for anyone that needs it as could not find a copy on web but for now very happy with red hot X single player working correctly. Just a minor routing issue on mech but will do my homework on mech routing and move some wires about on routing plug hopefully a simple sketch or explicit action out there for doing this

#3 Twostroker

Twostroker

    Newbie

  • New Members
  • 129 posts

Posted 04 June 2018 - 12:59 PM

Hi there it sounds like it could be a different power supply to what it should be. There's one type of psu for the scorpion 4 in the smiley cabinet and one type for the scorpion 4/5 in the eclipse cabinet. Pin outputs are slightly different and as you have discovered. You can swap the wires in the loom over no problem.

#4 mrrix

mrrix

    Newbie

  • New Members
  • 78 posts

Posted 14 June 2018 - 12:28 PM

Sorry its took so long but for anyone that needs a scorpion 4 manual i have scanned it. Not the best scan but it helped with my issue and may help someone further down the line. Its from Deal or no deal dream factoryAttached File  Scorpion 4 Manual. DOND.pdf   27.71MB   65 downloads






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users