Jump to content


Photo
- - - - -

Red Gaming DNA


Best Answer Wizard, 28 March 2018 - 09:26 PM

You can see some of the red values on that pic Reg just posted at DIF, it might help?

Go to the full post


  • Please log in to reply
13 replies to this topic

#1 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 28 March 2018 - 04:53 PM

Anyone have access to this machine? Layout is 99% done but lacking values for the Red DNA Helix (See pictures) Have looked at a few pictures/videos but they're to poor quality to make out.

 

Cheers.

Attached Files



#2 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 28 March 2018 - 04:58 PM

do you have links to the videos / images you used as more eyes maybe better than two 


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#3 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 28 March 2018 - 05:00 PM

They're terrible, could have 100 eyes on them!

 

Attached Files



#4 TommyC

TommyC

    Layout Designer

  • Layout Creator
  • PipPipPipPipPip
  • 2832 posts

Posted 28 March 2018 - 05:23 PM

There's a flyer knocking about for this matty just ask for a copy of it. I have it bit im at work so no access to pc.
Hold the bells mate.

#5 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1672 posts

Posted 28 March 2018 - 06:00 PM

How do you get them?

 

If it's by nudging in certain symbols, can't you nudge them in, in test mode and note how much each lamp gives, when you hit it. Sure that's what I did with values on some of the Reds I have done.



#6 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 28 March 2018 - 07:55 PM

Would the flyer have them Tommy?Worth a shot if anyone has it :D

 

 

How do you get them?

 

If it's by nudging in certain symbols, can't you nudge them in, in test mode and note how much each lamp gives, when you hit it. Sure that's what I did with values on some of the Reds I have done.

 

There are 2 versions of the feature:

 

1) You nudge/spin them in 3 in a row, doing this you Hi/lo around the trail and as you land on each square it awards the prize, they all start blue and you must land on them to turn them red and land on them again to get the value. Given it's a £3 - £12 feature good luck doing more than 3 or 4 hi/lo's.

 

2) Get all 3 lit during the feature with Nudges/fruit steps (Not on the winline at the same time or you get the above feature), then as you Hi/Lo up the feature board it moves around the trail, acting like a safe cash. So you can only ever get 1 value. Machine can be jackpot happy and will still kill on 3's & 10's while fairly low down so hard to make any progress.

 

Given it's based on the Hi/Lo being kind it's very hard to land on a value once it's red. Took me an hour to figure all the blue ones & another few hours of playing i only found 3 of the red values.



#7 Wizard

Wizard

    MFME Creator

  • Regulars
  • 719 posts

Posted 28 March 2018 - 08:07 PM

Try stepping through the lamps in Test Mode, usually they will light from left to right. You could check the Blue ones to see if that rule is applied.


Warning: This post is mostly my own opinions and may contain irony, if you are obsessed with PAST history you may want to ignore it.


#8 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 28 March 2018 - 08:44 PM

Try stepping through the lamps in Test Mode, usually they will light from left to right. You could check the Blue ones to see if that rule is applied.

 

Sadly not, just says Helix 1 - 12 and HelixR 1 - 12.



#9 Wizard

Wizard

    MFME Creator

  • Regulars
  • 719 posts

Posted 28 March 2018 - 09:26 PM   Best Answer

You can see some of the red values on that pic Reg just posted at DIF, it might help?


Warning: This post is mostly my own opinions and may contain irony, if you are obsessed with PAST history you may want to ignore it.


#10 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 28 March 2018 - 09:57 PM

Thanks for the heads up! Can make them all out from that :D



#11 tedness69

tedness69

    Newbie

  • New Members
  • 3 posts

Posted 29 March 2018 - 08:04 AM

Matty you are my new fave person in the whole world!! i have been hoping someone would do this one for AGES! - used to love this machine - in my top 3 of all time just because it was so playable and there is a learning curve to working the machine for max effect. MANY thanks for doing this!



#12 TommyC

TommyC

    Layout Designer

  • Layout Creator
  • PipPipPipPipPip
  • 2832 posts

Posted 29 March 2018 - 11:50 AM

Glad you got it sorted mate.
Hold the bells mate.

#13 samson81

samson81

    I have no regrets

  • Layout Creator
  • PipPip
  • 666 posts

Posted 30 March 2018 - 12:10 PM

Sorry I didn't see this post before,

 

see attached

Attached Files



#14 Matty.N

Matty.N

    Member

  • Regulars
  • 3111 posts

Posted 30 March 2018 - 01:25 PM

Sorry I didn't see this post before,

 

see attached

 

I see the flyer shows arrows which would have eliminated some of the guess work, but hey! That's part of the fun, thanks for the flyer. it's there for a DX now if need be.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users