well with this bad weather I decided to look at the impact CPU cards
This one was a bit blue around it so decided to strip all the components off in the affected area
it does look a bit bad!!!
scraped the rot off with a fiber pencil. surprisingly there was only about 6 tracks broken, but a good few eaten at the edges of the traces! so patched up every trace that was remotely eaten! Kynar wire was soldered over the traces, this took several hours to complete! (with a rest from it in the middle as you have to take a rest!!)
it now looks like this!
its now having the solder resist applied!
View the full article
