4 replies to this topic

[user0039]

Hi All,

Just got pinball wizard by JPM.

Enjoying it so far, have a question though, hopefully someone will be able to help out.
How do I do a hopper dump ? When I open the base of the machine and open the second compartment where the dump boxes are, the switch there (labels hopper dump) doesn't do anything. I've tried a key in the front of the machine with a small red LED below it, doesn't do anything, tried it with the top of the machine open etc.. nothing.

Can anyone shed any light or advise me please ?

Thanks

[Bencrest]

Not sure if it is the same procedure to Barcrest MPU5 machines, but heres how I do it :

1) Open bottom door.
2) Insert and turn the Refill key.
3) Press the Hopper Dump switch, and
4) You may need to press 'start' or go through some options in the menu to get it going

Hope that works!

[lincs1]

you can also go into test mode and dump the hopper that way.

markus

[user0039]

Hi,

Tried to do it with the refill key, I powered machine up, waitied for it to go 'live' then opened bottom door. Inserted the key (above the red LED ?), turned it 180" then pressed the hopper dump switched, nothing happened. Tried pressing start button, nothing

How do you get into the test mode on this machine ? I've got a POT BLACK by barcrest and thats easy, there is a white switch at the back of the cabinet. Can't see anything on this that would allow me in, there is another switched inside which is a float top up ???

Sorry for being a complete newbie to this guys !!!! lol