when I play a fruit machine I like to clear the ram 1st,but when I do this on certain machnes I am getting a lot of errors i.e hopper np a3?

ram problem
Started by reddevil25, Dec 12 2016 01:02 PM
5 replies to this topic
#1
Posted 12 December 2016 - 01:02 PM
#2
Posted 12 December 2016 - 01:11 PM
Simple solution, don't clear the ram I really don't see the advantage of doing it. I take it you've done bar x extreme going by the error, I think captain said on this just start it up and let it re start normally until it clears the errors
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!
#3
Posted 12 December 2016 - 01:15 PM
The Np stands for not paired or CCT H meaning hopper .As later scorpion5 etc are DES Key. Naturally you would take the hopper out turn it up side down for 5/10 sec turn back round connect it back to the machine. Some on the alpha will say Des key Paired or trusted mode enabled. Please recycle power. Then it marries back up to the mpu. lock the doors then done.
Same rule but not for C/mechs Eagle and CF9524e and SR5e are done vai dills/rota switch . SR5Des is a turn upside job would have to be done. The code for would be CCT C meaning coin mech or NP C.
Note Accepters are done via Dills or NV11 by the pair/reset button again the Code for that would be CCT N or NP N meaning Note
- captainhaddock likes this
.._-=It`s not a problem only a challenge =-_..
#4
Posted 12 December 2016 - 01:24 PM
check post 19 on here http://www.fruit-emu.com/forums/topic/52529-scorpion-5bar-x-extreme/
#5
Posted 12 December 2016 - 09:01 PM
The Np stands for not paired or CCT H meaning hopper .As later scorpion5 etc are DES Key. Naturally you would take the hopper out turn it up side down for 5/10 sec turn back round connect it back to the machine. Some on the alpha will say Des key Paired or trusted mode enabled. Please recycle power. Then it marries back up to the mpu. lock the doors then done.
Same rule but not for C/mechs Eagle and CF9524e and SR5e are done vai dills/rota switch . SR5Des is a turn upside job would have to be done. The code for would be CCT C meaning coin mech or NP C.
Note Accepters are done via Dills or NV11 by the pair/reset button again the Code for that would be CCT N or NP N meaning Note
Now theres a man who is currently working in the industry.. Nice to see a fellow Engineer getting technical
- impact likes this
#6
Posted 12 December 2016 - 09:47 PM
And my Head well wont fit into a bell fruit eclipse cabinet now lol. I sure do work in the gaming industry
.._-=It`s not a problem only a challenge =-_..
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users