3 replies to this topic

[gingerslf]

I've just bought one of these and have a 'few' questions....Perhaps I should have paged the 'oracle' ..... ...2nd thoughts, I might be able to understand the replies here better...he he.

1....It's set at 70% ...how do I change this...holds are few and far between, would changing % help things?

2....How do I run a test to see which bulbs are not working?

3....The 'Yellow Full Set Series' light and the nudge pot #5 lights are permanently on..Is this correct?

4....How do you actually manage to light a 'Full Set'..if you get past go you get the jackpot!

5....I get random nudges...is that correct?

6....There is a lock above the one which accesses the cash boxes at the bottom....What's that for...Do I need a key? Can I get one? There also seems to be some kind of plate missing above this lock. What's that all about?

7....How do I get the £ coins out...not that I need to at the moment...but you never know.

8....Flashing red light on motherboard!!!! Is this correct?

9....What's the Man in a Top Hat with a cane on the reels all about?...What happens when I get him on the winline?

10....How do I access the bulbs that are hard to get too...ie...the ones bottom right and left. Is there a catch to allow the front to open?...I found 3 butterfly screws, is it them?

So many question..Answers on a postcard please....LOL

Any other tips/cheats...PLEASE...

[ross]

I've just bought one of these and have a 'few' questions....Perhaps I should have paged the 'oracle' ..... ...2nd thoughts, I might be able to understand the replies here better...he he.

1....It's set at 70% ...how do I change this...holds are few and far between, would changing % help things?

2....How do I run a test to see which bulbs are not working?

3....The 'Yellow Full Set Series' light and the nudge pot #5 lights are permanently on..Is this correct?

4....How do you actually manage to light a 'Full Set'..if you get past go you get the jackpot!

5....I get random nudges...is that correct?

6....There is a lock above the one which accesses the cash boxes at the bottom....What's that for...Do I need a key? Can I get one? There also seems to be some kind of plate missing above this lock. What's that all about?

7....How do I get the £ coins out...not that I need to at the moment...but you never know.

8....Flashing red light on motherboard!!!! Is this correct?

9....What's the Man in a Top Hat with a cane on the reels all about?...What happens when I get him on the winline?

10....How do I access the bulbs that are hard to get too...ie...the ones bottom right and left. Is there a catch to allow the front to open?...I found 3 butterfly screws, is it them?

So many question..Answers on a postcard please....LOL

Any other tips/cheats...PLEASE...

1. if you are talking about the real machine then there will be dip switchs in the back dont know the order of them though sure you can find someone with the machine that would tell you

2. in the back is a red botton hold for 10 secs and will go to test mode

3.dont think so

4.if you land on all the same colour sets for example old kent road and the one on the left next to it are broun if you land on both the broun set will be rewarded

5.cant remember

6.i didnt have a key for that lock ether so dont know wot its for

7.hold the red switch again but for about 2 secs (i think)

8.yes petty sure it is

9.not sure witch one your talking about if could be a bonus or hidden features

10.the butter fly screws are for the reels i think and the best way i found was through the back and just take out the paytubes and you can get to the hard to get ones that way and the ones at the top are complete and uter basta*s to get in lol

[skabaz]

1.on the board which will be at the bottom next to the powersupply when you open the backdoor there will be a bank of around 8 switches,the last few switches will determine the % payout.

2.on the same board there is a red button press it once and it will go into test routines,one of which is the bulb test.(dont keep your finger on it because you will go into the demo mode)

3.you will have have a fault on the lights transistors on the board i have been talking about.you may need to get a replacement board on ebay if you dont have a supplier near you.

4.cant remember!!

5.yes

6.refill key lock not needed unles you want to refill the machine with money from the front.dont worry about the plate that is missing that was for an advertising plate(most are missing)

7.test routines(as with the bulb test

8.its supposed to flash.

9.hidden features i think but cant remember for sure

10 best way is to take the payslides out but some are still difficult to get to.

baz

[gingerslf]

3.you will have have a fault on the lights transistors on the board i have been talking about.you may need to get a replacement board on ebay if you dont have a supplier near you.

baz

Thanks for the speedy responses fellas......

Baz....sorry to be a bit of a dummy, but I aint got a clue what you are on about... ...what's the chance that you could tell me exactly what I need.....even better, what's the chance you could point me to a link on ebay where someone is selling what I need....I know....I'm a cheeky s0d...lol....
Thanks
Steve

Oh and BTW....would it be easy for a complete dummy like me to install?