11 replies to this topic

[chris_newton]

Hi all

Anyone have any idea how much it would cost to get a note acceptor supplied and fitted to a barcrest pacman power up fruit machine, it's already for the facia for it at the front and the box is there inside with wires etc.

Chris

[vectra666]

you could get one from ebay and fit it yourself. Afaik its only a case of re attaching the wires which you have and configurating the NV to the machine

[chris_newton]

you could get one from ebay and fit it yourself. Afaik its only a case of re attaching the wires which you have and configurating the NV to the machine

Honestly mate I'm hopeless at stuff stuff like this, I'd definitely need it fitting

[chris_newton]

I can buy a nv8 on eBay for 25 pound. Would this fit? All I need is someone to fit it

[aaamusements]

You're certain the loom is in there? As in the wires and the plug that connect up to it?

[chris_newton]

I think so, I'll post some pics later

[chris_newton]

Here are a few pics, hope this helps !

Attached Files

•  IMG_20160117_124134.jpg   174.72KB   1 downloads
•  IMG_20160117_124226.jpg   162KB   1 downloads

[aaamusements]

The only cable visible there is a power one, probably for the illumination of the note acceptor bezel and not the proper multi-cable loom that is needed to connect the acceptor.

[chris_newton]

So if that's the case how much am I looking at to get one fitted?

[aaamusements]

You might be able to get one included with a note acceptor. Then it's just a case of someone plugging it in and setting it up.

[NickYerPesos]

Where are you based Chris

[chris_newton]

I'm in Stockton on Tees near Middlesbrough