Jump to content


Photo

Manual help need on my machine

Line Dancer Machine

Best Answer captainhaddock, 03 January 2016 - 09:48 AM

Can't find a manual for that specific machine - so here's some error codes for a mazooma sc4 machine, according to some manuals the default dip settings are all in the off position.

 

10 COIN MECH ERR General coin mech error Check validator
(including unspecified coins)
11 MECH IOOP ERR £1 Coin mech fault "
12 MECH 5OP ERR 50p Coin mech fault "
13 MECH 20P ERR 20p Coin mech fault "
14 MECH 10P ERR 10p Coin mech fault "
15 MECH 20T ERR 20p Token mech fault "
16 MECH NOTE ERR Note acceptor errors Check note
acceptor
17 PAY UNIT ERR Hopper fault Check opto/jam
19 STRIM ALM Strim Alarm Check acceptor

20 GEN REEL ERR General reel errors
21 REEL 1 ERR Reel 1 Fault Check reel Opto
22 REEL 2 ERR Reel 2 Fault "
23 REEL 3 ERR Reel 3 Fault "
24 REEL 4 ERR Reel 4 Fault "
25 REEL 5 ERR Reel 5 Fault "
26 REEL 6 ERR Reel 6 Fault "

31 MUX ROW ERR Multiplexer Alarm - Row Check Lamp strobes

42 MEM RESET ALM Memory Cleared Check Battery
43 STUCK BUT ALM Button Stuck
44 NO % KEY ERR No Percentage Key
48 ON/OFF ALM On/Off tamper alarm
49 STAKE KEY ERR No stakes/prizes key

51 EPROM ERR EPROM failure Check Game Card
53 RAM ERR RAM check fail Check Battery
56 PSU ERR Power Supply Fail 12/24v Fail

Go to the full post


  • Please log in to reply
2 replies to this topic

#1 fruitmachine13

fruitmachine13

    Newbie

  • Regulars
  • 96 posts

Posted 02 January 2016 - 10:45 PM

I am looking for the manual for this machine cause I need the dip swittching and error code page if any one has it or is all scorpion 4 board dip switch settings the same?

 

Any help

 

Regards

 

Damon

Attached Files



#2 captainhaddock

captainhaddock

    Layout Designer

  • Layout Creator
  • PipPip
  • 740 posts

Posted 03 January 2016 - 09:48 AM   Best Answer

Can't find a manual for that specific machine - so here's some error codes for a mazooma sc4 machine, according to some manuals the default dip settings are all in the off position.

 

10 COIN MECH ERR General coin mech error Check validator
(including unspecified coins)
11 MECH IOOP ERR £1 Coin mech fault "
12 MECH 5OP ERR 50p Coin mech fault "
13 MECH 20P ERR 20p Coin mech fault "
14 MECH 10P ERR 10p Coin mech fault "
15 MECH 20T ERR 20p Token mech fault "
16 MECH NOTE ERR Note acceptor errors Check note
acceptor
17 PAY UNIT ERR Hopper fault Check opto/jam
19 STRIM ALM Strim Alarm Check acceptor

20 GEN REEL ERR General reel errors
21 REEL 1 ERR Reel 1 Fault Check reel Opto
22 REEL 2 ERR Reel 2 Fault "
23 REEL 3 ERR Reel 3 Fault "
24 REEL 4 ERR Reel 4 Fault "
25 REEL 5 ERR Reel 5 Fault "
26 REEL 6 ERR Reel 6 Fault "

31 MUX ROW ERR Multiplexer Alarm - Row Check Lamp strobes

42 MEM RESET ALM Memory Cleared Check Battery
43 STUCK BUT ALM Button Stuck
44 NO % KEY ERR No Percentage Key
48 ON/OFF ALM On/Off tamper alarm
49 STAKE KEY ERR No stakes/prizes key

51 EPROM ERR EPROM failure Check Game Card
53 RAM ERR RAM check fail Check Battery
56 PSU ERR Power Supply Fail 12/24v Fail



#3 St3v3tom

St3v3tom

    Newbie

  • New Members
  • 1 posts

Posted 19 January 2016 - 09:04 PM

I have everything except the cabinet if you need any spares, it's all here




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users