5 replies to this topic

[Taylor525]

There's not much information out there about this so I wondered if anyone else has done this. A lock had broke and needs drilling out. Does anyone know the best way to do this successfully? Cheers

[chasnbons]

Drill a small pilot hole in the middle of the barrell and then use a bigger drill.  The back will fall off and hey presto, the door opens

[nails]

just like chas said, though last time i did it i just used a big drill and drilled the hell out of it

[chasnbons]

just like chas said, though last time i did it i just used a big drill and drilled the hell out of it

 

Actually so did I, but I thought I'd better give the recommended way to someone who hadn't done it before

[Taylor525]

Haha thanks for that, I'll have a go at that, and see what happens, last thing I want to do is force entry!

[spa]

I would also try a couple of universal keys in it first. There are countless machines that use these as I think they came as standard? Most likely getting put back on when selling on.

 

All my mpu4s all work off the same key!