10 replies to this topic

[dave t]

Hi got a cops and robbers safe cracker bell fruits scorpion 5 ,

The mei cash flow was faulty so I. Have replaced the mech with an sr5i
It's cctalk it's doesn't have a routing plug I have had afew with these in the same and no routing plug

Since the sr5i has been in its routing all coins into the same cash box

So what can I do to Make the £1's go into the separate cash box??

Cheers dave

[impact]

you need really a cf95xx mech and an ibuttion programmer with bellfruits routing on the ibutton. Other then that if it shows you in you manual make a router plug from it i.e link pin1 to pin3 pin 7 with diode into pin 11 this is a pure example

Edited by impact, 20 December 2013 - 12:07 AM.

[dave t]

Yer that's what was in it , I haven't got amanuensis for it is there download for scorpion 5 and sr5i routing?

I didn't need this in others is it in the software??

[impact]

The scorp 5 is a cctalk machine hopper c/mech note accepters all need to run on serial and not the oldskool parallel setup. If the old tin can is right you can use the same routing layout for a scorpion4 c435a which is a money controls mech. You need to pm cliff whos the owner of the repo site. Who can let you view docs on routing etc. I`m sure tho if you ask nickyerpesos on here he mite get you one already done if he is getting rid of any scorpion4 machines. You may have to ask very nicely tho

[dave t]

I have a routing plug for ac453a and it's not made ant difference?

[impact]

It dose needs diodes in the right places then old pish sticks. You need a manual to do the routeing ive done this in the past so I know it works. When you connect your sr5 or I do you get power going to the mech there is led on the back. So at the moment you connect your sr5 and all coins go into the cash box or into the hopper. What a bummer you need a routing plug from an scorpion4 or a manual

[dave t]

Yer all coins go in the left cash box but £1s go in the hopper which is correct , then when hopper is full the £1s go into the cash box which is also correct, so that's the only fault all coins going in the same box

[dave t]

Plus I do have an older scorpion 4 here but that got 126 in it , although I do have monster cash in storage which is a slightly newer scorpion 4 than the one I have here?

[impact]

Ahh that's not bad then but yes you can try using the other scorpion4 machines routeing plug as long as its got the same hopper ie not a 10p and pound only on that scorp4 machine or you will have 10p div into the hopper tray shelf or on top on the hoppers metal housing.

[gilbeada]

From memory the SR5i will ignore the routing plug when you start it up in cctalk mode,it only reads from eeprom. 

 

You'd have to power it up parallel and 'import' the routing plug into memory (rotary position 9) 

 

I've got a manual for it somewhere if that would help? (the sr5i)

 

Cheers

Adam

[dave t]

hi I put an sr5 in it and it worked but yes that would help so I can perhaps put one in next time,  and yes it does seem it ignores the routing plug

 

 

thanks dave