Jump to content


Photo
- - - - -

Extreme Gaming Audio Alarm "Hey Kick it Out" (I think)


  • Please log in to reply
11 replies to this topic

#1 c0ld

c0ld

    Newbie

  • New Members
  • 3 posts

Posted 08 December 2013 - 05:09 PM

I've just bought an Extreme Gaming Can You Dig machine and when I power it up, sometimes it has an audio alarm that says "HEY KICK IT OUT" or something, it's very hard to understand. If I give the machine a little shake, sometimes it fixes it.

I've had a look about and I can't find out what this alarm is trying to tell me.

Any help would be greatly appreciated.

#2 stanmarsh14

stanmarsh14

    Sado-masochist

  • Gold Supporters
  • 3120 posts

Posted 08 December 2013 - 07:50 PM

Hi and welcome.

First of all, we need to know what message appears on the machine's Alpha display, as that will tell us a lot about the issue to hand.



#3 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 08 December 2013 - 07:53 PM

Welcome.. Also just to let you know it's.. "Hey! Check it out" :)

#4 Guest_ricardo de ponsa_*

Guest_ricardo de ponsa_*
  • Guests

Posted 08 December 2013 - 09:04 PM

As stated in the previous post 'Hey check it out', usually full volume is to let the arcade manager know there is a fault. If you shook it and then it worked, either you frightened it into submission or there could possibly be a loose connection. Have a good look inside (mains unplugged) and try all the connections to see if they are OK and making contact.



#5 c0ld

c0ld

    Newbie

  • New Members
  • 3 posts

Posted 09 December 2013 - 04:22 PM

Thank you very much for the speedy replies folks.

 

I've had a look and It doesn't seem to have any display inside that will give me a code, however I do have a few green LED lights.

One of which (the far right one) flashes Green 13 times and then flashes Red from the 14th onwards while the alarm sounds. The 7th Green Flash pauses briefly.

 

I'll try to see if there are any loose connections when I get home later, perhaps I missed something.

 

Many Thanks!!



#6 richy1976

richy1976

    The furniture

  • Regulars
  • 2601 posts

Donator

Posted 09 December 2013 - 04:49 PM

on the display on the front of the machine, any codes?



#7 I have finished

I have finished

    I will never finish in FME here!

  • Regulars
  • 837 posts

Posted 10 December 2013 - 07:39 PM

Welcome C0ld! As stated before, it is "Hey check it out," although yes, it does sound like "kick it out". I know this due to many barcrest machines I use on MFME. I didn't realize that extreme gaming used the same samples as Barcrest, same as Vivid. Can anyone help me with this? Many thanks. Thomas.



#8 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 10 December 2013 - 10:51 PM

All mpu5 machines have "check it out".. It's not much the manufacturers.. But the mpu itself.
So barcrest, vivid, red gaming, etc used mpu5 in the past so have this noise on some of their older machines
I think extreme gaming (the machine in question,) uses mpu6 technology, not epoch, as they used to.

Edited by NickYerPesos, 10 December 2013 - 10:53 PM.


#9 I have finished

I have finished

    I will never finish in FME here!

  • Regulars
  • 837 posts

Posted 11 December 2013 - 12:14 PM

Thanks Nick Yer Pesos. I would've thought it was the MPU itself, but silly me I didn't! I suppose it's the same with all Scorp4 machines they all have that eary alarm like an out of tune piano? I know that Crazy Fruits, DOND and various others do. Talking of Epoch, this is the month I have been waiting for ...



#10 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 11 December 2013 - 01:17 PM

All mpu5 machines have "check it out".. It's not much the manufacturers.. But the mpu itself.
So barcrest, vivid, red gaming, etc used mpu5 in the past so have this noise on some of their older machines
I think extreme gaming (the machine in question,) uses mpu6 technology, not epoch, as they used to.

 

It's MPU5, used to own one myself, it's from circa 2007.


Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#11 cardie

cardie

    Me Gusta

  • Layout Creator
  • PipPipPipPipPip
  • 3431 posts

Posted 12 December 2013 - 11:34 AM

Thank you very much for the speedy replies folks.

 

I've had a look and It doesn't seem to have any display inside that will give me a code, however I do have a few green LED lights.

One of which (the far right one) flashes Green 13 times and then flashes Red from the 14th onwards while the alarm sounds. The 7th Green Flash pauses briefly.

 

I'll try to see if there are any loose connections when I get home later, perhaps I missed something.

 

Many Thanks!!

The alpha display on the front the machine at the top of the bottom glass, the blue one :)


My Youtube


Posted Image

Rest in peace Barcrest !

Quit Gambling as of 3rd of March 2012


#12 c0ld

c0ld

    Newbie

  • New Members
  • 3 posts

Posted 09 May 2014 - 05:55 PM

Thanks for all your replies, sorry for the late reply. The blue Alpha screen stays completely inactive during this entire error process :(




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users