7 replies to this topic

[nick_uk_911]

Hi, I have acquired a Popeye machine JPM, it doesn't work. When turning on it lights up, 4 red led's on the mainboard, reels don't spin, LED doesn't show bank etc...

Inspected Main Board, battery has leaked and caused some corrosion over a small area. 

I'm guessing i will be needed a new board/repair service?

 

Its a long shot but does have a system 5 board to sell or know of anyone i could ask??

 

Thanks very much!

 

Nick

 

PS could attach pictures if it helps...

[richy1976]

I have a conductive pen to draw circuits back on the board, they are around £18 though.

[nick_uk_911]

About 5/6 diodes have dissolved due to the battery leak, I was hoping someone could help but it looks like its going to be difficult to locate a system 5 board as they are dead technology now!

[SweatyHams]

whats system 5 bord looks like my dad has some spare bits from old machins and would maybe sell one board for good price 2u thanks

[richy1976]

Cant find a pic of one.

Popeye, hagar, fairground, circus etc are system5 from the early 90's

Jpm board.

Edited by richy1976, 08 August 2013 - 07:16 PM.

[SweatyHams]

oh that old is it sorry i think his machines are not that old maybe i cant help then maybe post a pic anyway i can check

[nick_uk_911]

i have uploaded pictures of the board and the damage over at the mpu mecca

 

http://www.fruitemu....fruity-project/

[SweatyHams]

yeah sorry no have not got this board in our spare pile of parts