7 replies to this topic

[nick_uk_911]

Hello, 

 

I'm asking this question for a friend who recently purchased a DOND Club (excuse my language lol)

Anyway its the oldish clubber (not the red mist/beat the banker) and runs on Scorp4. I had a quick look and it has the black metal plate where a note acceptor can be fitted, but appears to be missing the looms, i know a few fruit machine engineers, however they said they could only get their hands on the wiring if they come across one, and obviously its a few years old now & most of the machines they deal with are Scorp5/Mpu6 etc. 

 

 

Here it is:

http://www.fruitmach...67x300[ekm].jpg

 

If there's anyone on here who knows where i could find the right looms lemme know. 

 

Cheers all,

 

P.S I should have taken a photo really of the inside of the machine, if that helps i can grab one when i next see him.

[nails]

they should be inside the machine already, as far as i was aware all BFM machines had the internal wiring as standard?

 

as you open up the front their tucked into the cables that run down the left hand side of the glass, where the said acceptor would be?

[NickYerPesos]

they should be inside the machine already, as far as i was aware all BFM machines had the internal wiring as standard?

 

as you open up the front their tucked into the cables that run down the left hand side of the glass, where the said acceptor would be?

 

Some machines require an extra part of the loom for Japan Cash acceptors.. but you should definately have the main part of the loom,

I shall speak to my supplier and see if he has any..

 

Thanks

Attached Files

•  907267_10200499514585621_1789996190_n.jpg   74.29KB   30 downloads

[nick_uk_911]

Ok thanks for that NICKYerPesos/nails,

According to the fruit machine engineer i spoke to.. he says that wiring shown in the picture he can get with ease, its the loom that goes from the MPU into that adaptor in the pic that he cant get hold of.  

I hope that makes sense to you, it doesn't to me i'm a bit of a novice with the internal  workings of a machine

[SourceLeisure]

Yep Standard Fitting As Standard - On Reverse Of Feature Board (Normally Tucked Up) But Depending Your Acceptor Your Need That Extra Component Described Above 

[nick_uk_911]

OK, i'll pass that info on thanks peeps, ill try and get a picture at some point, a picture speaks a thousand words after all 

[nails]

Some machines require an extra part of the loom for Japan Cash acceptors.. but you should definately have the main part of the loom,

I shall speak to my supplier and see if he has any..

 

Thanks

is it a special prize vending machine? i can see the handbag waiting to drop!

[nick_uk_911]

lol, All i know is that the guys who had a look at it were surprised that the wiring in that pic NickyerPesos attached is not present at all, so maybe the last owner fiddled about with it and removed it. Anyway if some kind fellow could track down the loom/wire from MPU to main part of loom that should sort it. 

We can get the Note Acceptor & the Main loom wiring, its just the other wire/loom we're having problems finding. 

Does that make sense!? Lol probably not, I've had a few cans so lets hope you guys understand