No replies to this topic

[MPU Mecca]

as requested by stef here are some pics of the strip down and clean jobs ive done on my royal exchange . when i got it in aug it was working ok after changing the board but it had been sat lying in a dry but dusty garage for at least 5yrs so as it was covered in dust and cobwebs it seemed the right thing to do .

[attachment=36471:SAM_2141.JPG][attachment=36473:SAM_2159.JPG] before and after
[attachment=36474:SAM_2167.JPG] cleaned up the coin hoppers
[attachment=36475:SAM_2164.JPG][attachment=36476:SAM_2165.JPG] the reels and the whole assembly
[attachment=36477:SAM_2155.JPG][attachment=36478:SAM_2189.JPG]stripping in progress and slides to reassemble
[attachment=36479:SAM_2168.JPG]20p slide back in
[attachment=36480:SAM_2192.JPG][attachment=36481:SAM_2193.JPG] pay tubes and other bits and bobs ready to go back in .
[attachment=36482:SAM_2196.JPG][attachment=36483:SAM_2198.JPG]50p slides back in and coin hopper
[attachment=36484:SAM_2211.JPG][attachment=36486:SAM_2213.JPG][attachment=36485:SAM_2212.JPG] job done .!

just a few touch up jobs to do but otherwise ok . hope this is ok stef ? if any one knows why the mechs and refil meter buzz when machine is switched on id like to know . see help thread

View the full article