
Opt 100p Alm 01
Started by darrenXx, Aug 21 2011 04:43 PM
11 replies to this topic
#1
Posted 21 August 2011 - 04:43 PM
i get this "OPT 100p ALM 01" and an alarm goes off after my top giza fruit machine is turned on. Can someone help me fix this ? as iam selling the fruitmachine tomorrow, so i need to fix it tonight. Thanks
#2
Posted 21 August 2011 - 04:53 PM
8 views and no replies

#3
Guest_Tommy c_*
Posted 21 August 2011 - 04:58 PM
Is there any money in the hopper? if there is then theres a £ jammed in the hopper so you will have to take the hopper out and check it for jammed coins.8 views and no replies
#4
Posted 21 August 2011 - 05:18 PM
thier is no coins in the hopper
#5
Guest_Tommy c_*
Posted 21 August 2011 - 05:23 PM
Ok pull the hopper out it has a gap at the bottom for grabbing it,look inside you can see the disl with 4 holes in it,grab that and try turning it anti clockwise and see if it turnsmake sure machine is off when your doing this,then put the hopper back switch on and see what happens.Also does it have an iou amount on the alpha display?thier is no coins in the hopper
Edited by Tommy c, 21 August 2011 - 05:24 PM.
#6
Posted 21 August 2011 - 05:28 PM
i was able to turn it a wee bit, but when i put the machine on it still has the same OPT 100p ALM 01Ok pull the hopper out it has a gap at the bottom for grabbing it,look inside you can see the disl with 4 holes in it,grab that and try turning it anti clockwise and see if it turnsmake sure machine is off when your doing this,then put the hopper back switch on and see what happens.Also does it have an iou amount on the alpha display?
should i have the bottom door and top door open or closed when i turn the machine on ?
#7
Guest_Tommy c_*
Posted 21 August 2011 - 05:40 PM
You should have both doors closed.If you trace the wiring from the hopper to the mpu5 just check that the plug for the hopper hasn't come out fo the mpu 5 the wire for plug for the hopper is normally situated at the bottom right corner.i was able to turn it a wee bit, but when i put the machine on it still has the same OPT 100p ALM 01
should i have the bottom door and top door open or closed when i turn the machine on ?
#8
Posted 21 August 2011 - 06:08 PM
as tommyc says. dont think you`ll be selling this tommorow

#9
Posted 21 August 2011 - 08:02 PM
still not fixed
not sure whats wrong

#10
Posted 25 August 2011 - 10:59 PM
it sounds like the infra red light which counts the coins out the hopper is either dirty or knackered, its underneath the spinning drum in the hopper, it looks like a little eye, try carefully cleaning it with a cotton bud.
#11
Posted 26 August 2011 - 12:38 AM
LOL I had a top giza not too long ago, you didnt get it off advance lesiure did you? I had the same problem and it turned out the 34v fuse had gone in the power supply, check the main board there should be 6 lamps 5 green one flashing green and red if the first of the 4 lamps is off then you have the same problem

#12
Posted 28 August 2011 - 05:25 PM
Hmmm Joined on the 21st...made numerious threads re a bad machine that was being sold the next day...flooded the forum then after help was given not even a thanks!
Mate I so fucking hope you buy a bum machine for loads and ask the members for help again...on which note I hope you didn't sell a bum machine!....or if you did its to someone that reads these forums haha
Mate I so fucking hope you buy a bum machine for loads and ask the members for help again...on which note I hope you didn't sell a bum machine!....or if you did its to someone that reads these forums haha

1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users