heeelp pg slotto IO3 failed to initialize
Started by kdservices, Aug 29 2009 08:44 PM
7 replies to this topic
#1
Posted 29 August 2009 - 08:44 PM
does anyone know if this is a simple problem of something more serious.
it was working last night i came and turned it on today and the screen says failed to initialize io3 call attendant.
i have checked all the connectors to the board but still no joy.
any ideas?
keith
it was working last night i came and turned it on today and the screen says failed to initialize io3 call attendant.
i have checked all the connectors to the board but still no joy.
any ideas?
keith
#2
Posted 30 August 2009 - 11:17 AM
Had this loads, with that horried alarm noise but after about 5 seconds it will boot if left
Or resetting at mains normally ok then.
Is it doing this every time and not booting?
Or resetting at mains normally ok then.
Is it doing this every time and not booting?
#3
Posted 30 August 2009 - 01:06 PM
it is doing it every time i have tried taking the plug out at the socket aswell but every time failure to boot
#4
Posted 07 September 2009 - 09:41 PM
Board is f***ed mate.
#5
Posted 07 September 2009 - 09:51 PM
fixed, found the answer on the mecca.
just had to clear the ram by shortint the battery all fine now
just had to clear the ram by shortint the battery all fine now
#6
Posted 07 September 2009 - 09:54 PM
Sounds like it's BIOS (Same as you get on a normal PC, they even use a small shuttle PC), went stroppy, as they sometimes can be on comps.
#7
Posted 07 September 2009 - 10:17 PM
Guessing its an astra ??
they run on win 2000 or me i think
they run on win 2000 or me i think
#8
Posted 07 September 2009 - 11:27 PM
Guessing its an astra ??
they run on win 2000 or me i think
One @ my local shithole, is on XP Home, when the tec showed me the gut's of it once, whilst trying to figure out a noisey fan issue (CPU fan was covered in crap, simple fix with a paint brush).
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users












