6 replies to this topic

[fruitmachineemu]

hiya does anyone know the quickest and easiest way to get the Nat setting on open as on xbox live it says its strict any way that i could change it?

[Deano]

X box sucks,give me a Speccy any day;)

[todd1970]

X box sucks,give me a Speccy any day;)

Wooohoooo spectrums rule...although C64 was pretty good as well.

Danny..are you looking to access the settings of your router in your question.

[Zoltar]

hiya does anyone know the quickest and easiest way to get the Nat setting on open as on xbox live it says its strict any way that i could change it?

Doesn't Network Address Translation (NAT) come enabled as standard on all ADSL wireless routers?

If it don't Danny, there will be a page in the router configuration where it can be enabled/disabled. My Netgear shows this on the first 'Basic Settings' page but I don't know much about D-Link stuff. But if it was easy to find on my Netgear, it shouldn't be all that hard to find on your router.

[stanmarsh14]

As Zoltar put's it, NAT should be enabled as default on most routers, if not, first thing would be to enable this.

If you are still having connection issues, then you may need to set up for the xbox only, the IP for it in the DMZ settings.

Not an ideal way to get things working, but it should get it working.

Full product support and firmware downloads here: http://www.dlink.co....j8qHCjrxCRK/Is=

[xvxvx]

I had to enable nat for my xbox live on the same router it is very crap for xbox live you want a netgear or buffalo or one of the new linksys 192.168.1.1
admin/admin enable upnp under advanced upnp it should then find your router
save reboot router

[scousespark]

http://www.dlink.co....iwtFirrzi5G IwN

try that. i used it myself to put setting in after son completely distoyed all my settings to get his xbox on line. thus we had no internet on our pc's. grrr. its all working now tho and his xbox works too