To update everyone, the board was cleaned as suggested and dried over the weekend. When put back in and switched on a few lights came on on the machine but it is still not working, however noticed that one of the fuses has now blown so I need to replace that once I get out to the local shops. I will try again hopefully later today.
26 replies to this topic
#22
malrob
-
- New Members
- 11 posts
Junior Member
Posted 29 October 2008 - 03:17 PM
I am now at a loss, this has been cleaned with vinegar, left to dry, fuse replaced that needed it and still will not power up. Any suggestions please. Do I need a new board and if so where can I get one from.
Need help please.
Need help please.
#24
cardie
-
- Layout Creator
-
- 3431 posts
Me Gusta
Posted 29 October 2008 - 03:57 PM
could be either one of 2 thingsI am now at a loss, this has been cleaned with vinegar, left to dry, fuse replaced that needed it and still will not power up. Any suggestions please. Do I need a new board and if so where can I get one from.
Need help please.
static could of caused the game card to fail
or the motherboard has had it i would keep an eye out on ebay for a cheap IMPACT motherboard and if that fails your game card may need replacing or reprogramming
#25
aaamusements
-
- Administrators
-
- 3508 posts
Admin
Posted 29 October 2008 - 04:52 PM
Eproms are unaffected by static.
They do however occasionally fail as you say cardie.
They do however occasionally fail as you say cardie.
#26
malrob
-
- New Members
- 11 posts
Junior Member
Posted 29 October 2008 - 10:41 PM
Thanks guys for taking the time to reply to my cry for help. i will look out for a processor board and a mother board and have a go at some serious fruit machine repairing. All the best to you all.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
