3 replies to this topic

[ikhlaq1]

hi,
need help with smash & grab by MDM leisure, program is i recently changed the MPU4 board for a reconditioned one copied the dip switch seetings & put into machine, put the machine into test mode & realised the sound wasn't working also the lights on the machine ain't in sequence plus an alarm
came up starting the machine 0.03 if that helps. so thouhgt changing it back to the old board might solve the problem it didn't
would be very grateful for your help
regads Ikhlaq

[Liverpool2008]

hi,
need help with smash & grab by MDM leisure, program is i recently changed the MPU4 board for a reconditioned one copied the dip switch seetings & put into machine, put the machine into test mode & realised the sound wasn't working also the lights on the machine ain't in sequence plus an alarm
came up starting the machine 0.03 if that helps. so thouhgt changing it back to the old board might solve the problem it didn't
would be very grateful for your help
regads Ikhlaq

never mess with machines ..............

if the machine works ...... leave it alone

[aaamusements]

Can't argue with the above... if it works don't touch it!

All I can think is that while changing the boards you have disturbed something or unintentionally created a short/open circuit.

[ikhlaq1]

never mess with machines ..............

if the machine works ...... leave it alone

yes sir ! I've already had my hand slapped for it.