Jump to content


Photo
- - - - -

help with each way nudger mk3


  • Please log in to reply
5 replies to this topic

#1 ikhlaq1

ikhlaq1

    Junior Member

  • New Members
  • 11 posts

Posted 22 September 2008 - 01:04 AM

hello,
the problem is money goes into machine no problem but does not register on credit board.
reprogrammed the coin mech & changed the mps2 CPU board still no joy, the machine is a 1986 style JPM each way nudger mk3 £2.40 jackpot 5p play. any help & advice will be very appreciated

#2 aaamusements

aaamusements

    Admin

  • Administrators
  • PipPipPipPipPip
  • 3508 posts

Posted 22 September 2008 - 05:36 PM

hello,
the problem is money goes into machine no problem but does not register on credit board.
reprogrammed the coin mech & changed the mps2 CPU board still no joy, the machine is a 1986 style JPM each way nudger mk3 £2.40 jackpot 5p play. any help & advice will be very appreciated


Most likely an MPU fault.
Check the coin mech connections as well.

#3 cardie

cardie

    Me Gusta

  • Layout Creator
  • PipPipPipPipPip
  • 3431 posts

Posted 22 September 2008 - 06:17 PM

not to sure if this works but i dont think the machine will accept money if its in door open mode

does it go into attract mode at all

My Youtube


Posted Image

Rest in peace Barcrest !

Quit Gambling as of 3rd of March 2012


#4 richy76

richy76

    Member

  • New Members
  • PipPip
  • 403 posts

Posted 22 September 2008 - 07:02 PM

does it have the old style metal coin mechs?

#5 ikhlaq1

ikhlaq1

    Junior Member

  • New Members
  • 11 posts

Posted 23 September 2008 - 11:41 PM

hi, everyone thanks for reply

it does not have a metal coin mech, standard call Sentinel takes all coins apart from £2 & 5p coins. also checked wiring for coin mech to the board

door is closed but if it was in demo mode it would take coins but not pay out.

I think cpu is in the MPS2 board wich I took out of another woking machine

thanks

#6 ikhlaq1

ikhlaq1

    Junior Member

  • New Members
  • 11 posts

Posted 24 September 2008 - 11:13 PM

Most likely an MPU fault.
Check the coin mech connections as well.


hi, changed MPU out of working working machine, checked coin mech connections all wired properly




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users