
Bell Fruit Lord Of The Rings Percentage Adjustment.
Started by martyn, Jun 24 2007 05:17 PM
5 replies to this topic
#1
Posted 24 June 2007 - 05:17 PM
Hi, I have a Bell Fruit Lord of the Rings fruit machine, how can I find out what percentage its set on, and how can I alter it?
many thanks,
Martyn
many thanks,
Martyn
#2
Posted 24 June 2007 - 07:04 PM
put the machine into test mode and the test labeled game data or key settings will say what % its on and the price of play.
you need a variable % key to change the setting.
baz
you need a variable % key to change the setting.
baz
#3
Posted 24 June 2007 - 07:21 PM
Hi, thanks for answer, what is the variable % key, is it the refill key? if not where do i get one and does it fit in the same lock as the refill key?put the machine into test mode and the test labeled game data or key settings will say what % its on and the price of play.
you need a variable % key to change the setting.
baz
thanks,
Martyn
#4
Posted 24 June 2007 - 07:27 PM
Following link should give you an idea what a %age key is: Fruit Machines at CMJSLeisure.com
As for where to fit it, unfortunately my knlowage only stretches to mpu4's which is NOT what you have here. I am guessing it fit's in either ON or close to the scorpion board is on your machine, or possibly near the rear door reset switch. You would be best getting a variable key as opposed to a fixed on as you can set a number of %ages with a variable key but with a fixed on you can not.
As for where to fit it, unfortunately my knlowage only stretches to mpu4's which is NOT what you have here. I am guessing it fit's in either ON or close to the scorpion board is on your machine, or possibly near the rear door reset switch. You would be best getting a variable key as opposed to a fixed on as you can set a number of %ages with a variable key but with a fixed on you can not.
#5
Posted 24 June 2007 - 07:52 PM
depending on your machine you will either have a scorpion 4 board(big board attached inside the machine where all the wires run to).if you have a scorpion 4 machine the plug in key will be attached at the inside left of the machine.
or
a scorpion 5 board which is also on the back of the machine should have the % key plugged into it(will either be a a small plug in with 4 switches on it or a coloured plug.
baz
or
a scorpion 5 board which is also on the back of the machine should have the % key plugged into it(will either be a a small plug in with 4 switches on it or a coloured plug.
baz
#6
Posted 25 June 2007 - 08:04 AM
Thanks to everyone for advice, I will try it later today.
cheers,
Martyn
cheers,
Martyn
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users