Hi all - I have a JPM Red Hot SIx (real machine) which works well with no problems. It was a 2006 rebuild by JPM. The only recent issues have been having to replace the battery on the processor card (fortunately although it had just started leaking it had not reached the board - battery was eight year old!).
Anyway - the machine has a blanking plate where you can fit a note acceptor and it looks like there is a connector on the end of the wiring loom just inside the machine where you would mount a note acceptor. Does anyone know whether it is possible to fit an acceptor to this machine and if so which one would I need to fit (NV4, NV10?) and how would I go about it?
Thanks very much
Mat
