Jump to content


TommyC

Member Since 18 Feb 2011
Offline Last Active Today, 01:08 pm
*****

#322725 {MPU5}Cross Fire Wdx

Posted by TommyC on 05 December 2018 - 07:47 pm

Who evers downloaded grab it again so the hoppers work right,cheers.




#322720 {MPU5}Cross Fire Wdx

Posted by TommyC on 05 December 2018 - 06:43 pm

File Name: Cross Fire Wdx

File Submitter: TommyC

File Submitted: 05 Dec 2018

File Category: MPU5


Here's another empire machine this time using mpu 5 tech,the flyer wasn't great no reel symbols available apart from the ones in the mpu dx,so i've used images from the flyer etc to make some clear-ish images,Not sure what it plays like etc as never played it before. Thanks to who ever created the mpu 4 version,wizard for sending me a copy so i could see what was going on etc,also for the new mfme v6x.All short cuts are the usual.
 
 
USE MFME V6.1 ONLY,THANKS.


Click here to download this file




#322672 {MPU4}Pit Fall Wdx

Posted by TommyC on 03 December 2018 - 02:56 pm

File Name: Pit Fall Wdx

File Submitter: TommyC

File Submitted: 03 Dec 2018

File Category: MPU4


Here's an mpu 4 machine which looks more like an mpu 5 machine by design,this hasn't been dx'ed as far as i know,thanks to wizard for the classic which could have been made by reg looking at the nudges ;) this saved me loads of time. Thanks to A:E for the font for the hi/lo reel and to wizard for the emulator.
 
 
 
USE MFME V6.1 ONLY,THANKS.


Click here to download this file




#322662 I'm a Celeb 10P 5 25P 5 releases

Posted by TommyC on 03 December 2018 - 07:20 am

He's on about the layout not the emulator,never seen a thanks from him,just a mythering f.ucker who grabs what he can. Never contributed anything to the forums either..... BELLEND!!!




#322660 I'm a Celeb 10P 5 25P 5 releases

Posted by TommyC on 02 December 2018 - 10:27 pm

Shut up you idiot if you read the original release you would know that the ram file is happy,thats why it's paying loads of jackpots out.Once it gets back to % it will go on the rob again,if your not happy clear the ram in config and it will stop doing it.If you can do any better go for it if not then wind your neck in lad.




#322544 {MPU5}Red Gaming's Jewel Strike 25 Dx

Posted by TommyC on 24 November 2018 - 09:35 am

Excellent looking dx mate,thanks for this.




#322340 Happy birthday i have finished

Posted by TommyC on 13 November 2018 - 07:50 pm

All the best.




#322339 {MPU5}D.N.A Red Gaming Wdx

Posted by TommyC on 13 November 2018 - 07:44 pm

File Name: D.N.A Red Gaming Wdx

File Submitter: TommyC

File Submitted: 13 Nov 2018

File Category: MPU5


Here's another red gaming machine for the red gaming fans out there,had to do a bit of cloning on this to get the top half of the flyer to look as it should,thanks to samsonf for the flyer matty for his classic for the lamps,and to wizard for the new mfme.  All short cuts are the usual.
 
 
USE MFME V6.1 ONLY,THANKS.


Click here to download this file




#322281 PROCONN - hit the six dx

Posted by TommyC on 10 November 2018 - 12:32 pm

Thanks for the layout mate.




#322279 {Scorpion 1}Club Attraction 150 Dx v6.1

Posted by TommyC on 10 November 2018 - 12:31 pm

Very nice dx thanks for this. 




#322198 Red Gamings DNA Wdx

Posted by TommyC on 07 November 2018 - 06:37 pm

No, it's antoher layout for fruit-emu and desertislandfruits

What the f.uck are you on about.




#322184 Red Gamings DNA Wdx

Posted by TommyC on 06 November 2018 - 08:11 pm

Ok I've cleaned the flyer up fro this machine and got it to a stage were a dx can now be made from it,my work pattern has changed so i don't have as much pc time now,i will sort asap :)

Attached Files




#322161 {MPU5}Bling King Crazy 25 Dx

Posted by TommyC on 04 November 2018 - 08:55 pm

Very nice dx thanks for this mate. Will have a bash,do like these kinds of games.




#322136 Astra's jackpot x classic

Posted by TommyC on 03 November 2018 - 06:34 pm

Look forward to it mate, good to see you releasing again.




#322130 MPU 4 - Big shot 2p classic

Posted by TommyC on 03 November 2018 - 01:41 pm

Many thanks mate.