Jump to content


Photo
- - - - -

Jpm led problem


  • Please log in to reply
6 replies to this topic

#1 chris1

chris1

    Junior Member

  • Regulars
  • 86 posts

Posted 19 September 2017 - 12:02 PM

Attached File  20170919_112804.jpg   193.48KB   0 downloads . Hello I've just got a new club mc ( around the world ) it's a crazy casino clone my only problem is the leds that run up and down the cabent do not work correctly, has anyone know were I could buy a working jpm led driver board pic enclosed thanks for help

Attached Files


Edited by chris1, 19 September 2017 - 12:05 PM.


#2 Twostroker

Twostroker

    Newbie

  • New Members
  • 129 posts

Posted 19 September 2017 - 06:52 PM

You can try E service, I've been getting some older mpu boards from there. Engineer tested too

#3 chris1

chris1

    Junior Member

  • Regulars
  • 86 posts

Posted 19 September 2017 - 08:09 PM

I have looked on e service but don't have any but thanks for help

#4 Twostroker

Twostroker

    Newbie

  • New Members
  • 129 posts

Posted 20 September 2017 - 09:33 AM

Yeah might be worth a phone call too...never know.

#5 mictas_1

mictas_1

    Junior Member

  • Regulars
  • 70 posts

Posted 01 November 2017 - 10:09 PM

Will have a look tomorrow evening, I have plenty of spare boards for Jpms and a pinball wizard I'm breaking too however this part might be a bit too new
Will post tomorrowt

Edited by mictas_1, 01 November 2017 - 10:09 PM.

well shave my body then throw me in the sea and call me flipper

#6 mictas_1

mictas_1

    Junior Member

  • Regulars
  • 70 posts

Posted 01 November 2017 - 10:12 PM

Will have a look tomorrow evening, I have plenty of spare boards for Jpms and a pinball wizard I'm breaking too however this part might be a bit too new
Will post tomorrowt


Sorry just noticed your machine is not running impact so I'm no use for ornament :-(
well shave my body then throw me in the sea and call me flipper

#7 chris1

chris1

    Junior Member

  • Regulars
  • 86 posts

Posted 02 November 2017 - 04:23 PM

thanks for looking anyway  :spinny:






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users