Jump to content


Photo
- - - - -

Bright light


  • Please log in to reply
7 replies to this topic

#1 Taylor525

Taylor525

    Owner and Parts Seller

  • Regulars
  • 508 posts

Posted 25 March 2017 - 08:17 PM

From the attached file, you'll see the issue. I've had this before from Scorp4. Is it a board issue or lamp board issue. I can't see much wrong with the scorpion board itself. Thanks

Attached Files


Edited by Taylor525, 25 March 2017 - 08:18 PM.


#2 Mavroz

Mavroz

    odd job man...

  • Layout Creator
  • PipPipPip
  • 882 posts

Posted 26 March 2017 - 07:52 AM

Possibly a bad transistor that drives those lamps...



#3 Taylor525

Taylor525

    Owner and Parts Seller

  • Regulars
  • 508 posts

Posted 26 March 2017 - 08:45 AM

Thanks I'll look into that.

#4 dangerousdave

dangerousdave

    Junior Member

  • Regulars
  • 127 posts

Posted 26 March 2017 - 09:41 AM

I may be wrong as it is over 10 years since working in the arcade but something is telling me that Scorp 4's had the main board, program cards and a further 2 smaller boards, usually attached to the top glass when you open the doors, I think one these was a hopper board and the other lamps board.  There was a problem with the first boards ever produced and these caused problems and possibly even cause the machine to go on fire.  They updated the board to a safe one which we had to go and change them all in the machines.  Might be worth checking what version board you have.



#5 No1Stoney

No1Stoney

    Senior Member

  • Layout Creator
  • PipPipPip
  • 815 posts

Posted 26 March 2017 - 01:19 PM

I may be wrong as it is over 10 years since working in the arcade but something is telling me that Scorp 4's had the main board, program cards and a further 2 smaller boards, usually attached to the top glass when you open the doors, I think one these was a hopper board and the other lamps board.  There was a problem with the first boards ever produced and these caused problems and possibly even cause the machine to go on fire.  They updated the board to a safe one which we had to go and change them all in the machines.  Might be worth checking what version board you have.

 

Think your thinking of Epoch tech there. Scorpion boards are mostly all in one boards, with a breakout board for lamps/buttons. This issue is probably to do with transistors on the main Scorp 4 board



#6 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 26 March 2017 - 06:38 PM

It can also be caused by a short circuit within either line of the wiring for that group of lamps. You will find one common wire that runs through all of these "bright" lamps.

But i would check your transistors first.. then wiring, then all else fails, new scorp 4 board.

 

Good luck



#7 Taylor525

Taylor525

    Owner and Parts Seller

  • Regulars
  • 508 posts

Posted 27 March 2017 - 07:25 PM

Thanks for the responses. In regards to the 2 other boards, there is 2 boards top left of the cabinet and I'm sure one of them is a lamp board. The other one is for stake and prize key. I'll look at that too

#8 dangerousdave

dangerousdave

    Junior Member

  • Regulars
  • 127 posts

Posted 27 March 2017 - 09:34 PM

 

Think your thinking of Epoch tech there. Scorpion boards are mostly all in one boards, with a breakout board for lamps/buttons. This issue is probably to do with transistors on the main Scorp 4 board

Yep, now you mention it Epoch rings a bell, damn I am rusty with my technologies!






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users