Jump to content


Photo
- - - - -

ram problem


  • Please log in to reply
5 replies to this topic

#1 reddevil25

reddevil25

    Newbie

  • New Members
  • 38 posts

Posted 12 December 2016 - 01:02 PM

when I play a fruit machine I like to clear the ram 1st,but when I do this on certain machnes I am getting a lot of errors i.e   hopper np a3?



#2 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 12 December 2016 - 01:11 PM

Simple solution, don't clear the ram I really don't see the advantage of doing it. I take it you've done bar x extreme going by the error, I think captain said on this just start it up and let it re start normally until it clears the errors
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#3 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 12 December 2016 - 01:15 PM

The Np stands for not paired or CCT H meaning hopper .As later scorpion5 etc are DES Key. Naturally you would take the hopper out turn it up side down for 5/10 sec turn back round connect it back to the machine. Some on the alpha will say Des key Paired or trusted mode enabled. Please recycle power. Then it marries back up to the mpu. lock the doors then done.

 

Same rule but not for C/mechs Eagle and CF9524e and SR5e are done vai dills/rota switch . SR5Des is a turn upside job would have to be done. The code for would be CCT C meaning coin mech or NP C.

 

Note Accepters are done via Dills or NV11 by the pair/reset button again the Code for that would be CCT N or NP N meaning Note 


.._-=It`s not a problem only a challenge =-_..

#4 captainhaddock

captainhaddock

    Layout Designer

  • Layout Creator
  • PipPip
  • 740 posts

Posted 12 December 2016 - 01:24 PM

check post 19 on here  http://www.fruit-emu.com/forums/topic/52529-scorpion-5bar-x-extreme/ :)



#5 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 12 December 2016 - 09:01 PM

The Np stands for not paired or CCT H meaning hopper .As later scorpion5 etc are DES Key. Naturally you would take the hopper out turn it up side down for 5/10 sec turn back round connect it back to the machine. Some on the alpha will say Des key Paired or trusted mode enabled. Please recycle power. Then it marries back up to the mpu. lock the doors then done.

 

Same rule but not for C/mechs Eagle and CF9524e and SR5e are done vai dills/rota switch . SR5Des is a turn upside job would have to be done. The code for would be CCT C meaning coin mech or NP C.

 

Note Accepters are done via Dills or NV11 by the pair/reset button again the Code for that would be CCT N or NP N meaning Note 

 

Now theres a man who is currently working in the industry.. :) Nice to see a fellow Engineer getting technical :)



#6 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 12 December 2016 - 09:47 PM

And my Head well wont fit into a bell fruit eclipse cabinet now lol. I sure do work in the gaming industry  


.._-=It`s not a problem only a challenge =-_..




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users