Jump to content


Photo
- - - - -

Rat Race VTP Meter Alarm


  • Please log in to reply
11 replies to this topic

#1 krayzeestyles

krayzeestyles

    NONE

  • Banned
  • 166 posts

Posted 17 February 2016 - 05:10 PM

Hi, I have been having ago at the old school Rat Race and for some reason, after spinning 1 credit it keeps making a dreadful alarm sound and displays 'vtp meter' :realmad:  I have tried checking and un-checking long term meters but does not make any difference, I still get the same thing.  The funny thing is that it will play fine in test mode.  But I don't wanna cheat and nudge in infinite amounts of £1.50 rats and slow down win a gain and get £1.50 after £1.50, it is not as much fun......lol  So if any one knows how to fix my Ratty? I would be really grateful.  By the way the old win a gain cabinet by Tommy C is ace, loads of fun :)

 

Thanks from K.S.Attached File  Screenshot (12).png   1.29MB   1 downloads


BANNED ACCOUNT DELETED


#2 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 17 February 2016 - 05:41 PM

I have this problem with another oldie layout maybe they should be played in the earliest mfme 1.0 a emulator I hardly play, mainly use 2.0/3.2/9.4/10.1. I'm also sure I've a different version of this if mines OK I'll pm you it later this evening.
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#3 krayzeestyles

krayzeestyles

    NONE

  • Banned
  • 166 posts

Posted 17 February 2016 - 05:50 PM

I have this problem with another oldie layout maybe they should be played in the earliest mfme 1.0 a emulator I hardly play, mainly use 2.0/3.2/9.4/10.1. I'm also sure I've a different version of this if mines OK I'll pm you it later this evening.

Thanks Vectra :)  speak to you laters.


BANNED ACCOUNT DELETED


#4 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 17 February 2016 - 06:56 PM

this version by pandy plays fine in mfme3.2 although a little light which makes the lamps harder to make out but plays none the less. Don,t think this version is available on here so PM'ed you it instead

Attached Files


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#5 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 21 February 2016 - 01:54 PM

Best bet is to look at the folder you downloaded it from.

 

That's the version it was created to run with.

Attached Files



#6 TommyC

TommyC

    Layout Designer

  • Layout Creator
  • PipPipPipPipPip
  • 2832 posts

Posted 21 February 2016 - 09:52 PM

if you go in to configuration in mfme 2 were it says display port make sure it is set to meters and it will be fine.


Hold the bells mate.

#7 barcrest junky

barcrest junky

    Senior Member

  • Moderators
  • 843 posts

Posted 22 February 2016 - 07:55 PM

if you go in to configuration in mfme 2 were it says display port make sure it is set to meters and it will be fine.


Yes, MPU3 machines created in mfme 1.0 have to be played in mfme 1.0 (ady) or amended in mfme 2.0 (TC) for meters due to improvements made in the emulator after 1.0.

bj
  • spa likes this

#8 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9040 posts

Donator

Posted 22 February 2016 - 08:22 PM

I only use mfme3.2/ or if the layout fits OK on lappy 2.0 never used 1.0
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#9 TommyC

TommyC

    Layout Designer

  • Layout Creator
  • PipPipPipPipPip
  • 2832 posts

Posted 23 February 2016 - 09:28 AM

Some layouts play really good in mfme 1.0 the timing of samples and speed of the emulation is really good with some of the older layouts. I play hyper viper alot the mpu4 version with synth sound. Mfme 1.0 plays it the best.
Hold the bells mate.

#10 krayzeestyles

krayzeestyles

    NONE

  • Banned
  • 166 posts

Posted 23 February 2016 - 07:49 PM

if you go in to configuration in mfme 2 were it says display port make sure it is set to meters and it will be fine.

Yeah but on lappy mate and if I do that and run it in mfme 3.2  I cannot see the whole machine, only the top half...cheers.


BANNED ACCOUNT DELETED


#11 barcrest junky

barcrest junky

    Senior Member

  • Moderators
  • 843 posts

Posted 23 February 2016 - 09:57 PM

Run it in MFME 1.1 - here you go.

 

Attached File  MFME v1.1.zip   830.1KB   5 downloads

 

bj

 



#12 krayzeestyles

krayzeestyles

    NONE

  • Banned
  • 166 posts

Posted 25 February 2016 - 11:02 PM

Thank you :)


BANNED ACCOUNT DELETED





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users