Jump to content


Photo
- - - - -

Jpm 5 Liner Cassic

mps2 jpm 5liner

  • Please log in to reply
8 replies to this topic

#1 d0uga1

d0uga1

    who put my name up there

  • Layout Creator
  • PipPip
  • 546 posts

Posted 20 January 2012 - 10:50 PM

ok not done a layout for a good while so i thought id give this a go as i couldn't see it in the downloads or over at the mecca, (but i may be not looking hard enough).

it a jpm mps2 machine by the name of five liner,

Posted Image

its been a bugger to begin with because it uses lamps for the 7seg display (took me ages to figure it out) and im still left with a few lamps hanging around which i assume are for the name of the machine.

i cannot fine the correct selection of reel symbols for this and the only artwork for it i can find is on the mecca but only a small picture is available, so if anyone has the old jpm reel symbols can you pm me them please and a decent pic of the machine if you have one thankyou.

anyway its not gonna be ready for at least 24 hours

Attached File  classic jpm 5 liner mps2.jpg   127.75KB   13 downloads

Edited by d0uga1, 20 January 2012 - 10:52 PM.

always on the scrounge for freebies.

#2 Guest_Tommy c_*

Guest_Tommy c_*
  • Guests

Posted 20 January 2012 - 11:38 PM

Better pic here but not that big.I've got the jpm's melons and grapes but not the 7's and £ signs.

Attached File  5.PNG   427.21KB   14 downloads

Edited by Tommy c, 20 January 2012 - 11:39 PM.


#3 Guest_Tommy c_*

Guest_Tommy c_*
  • Guests

Posted 20 January 2012 - 11:44 PM

Found this on the repro,pandy has done a dx of it but i can only find it on the repro

Attached File  untitled.PNG   1.67MB   21 downloads

#4 d0uga1

d0uga1

    who put my name up there

  • Layout Creator
  • PipPip
  • 546 posts

Posted 21 January 2012 - 12:09 AM

oh well perhaps it should get uploaded in the downloads section saves me carrying on with the classic.(pointless doing a classic if a dx is already been done)

i really should look harder before i start something lol

thanks for the info tommy.


(back to the drawing board)
always on the scrounge for freebies.

#5 Guest_Tommy c_*

Guest_Tommy c_*
  • Guests

Posted 21 January 2012 - 12:14 AM

Nowt wrong with making a layout for a machine that isn't even hosted here.I've done loads of layouts were i've not seen em on here only to find they have been done and upped elsewere.

#6 Guest_DAD_*

Guest_DAD_*
  • Guests

Posted 21 January 2012 - 12:22 AM

Good idea to look here before starting a layout :

http://fme.x10.mx/

#7 d0uga1

d0uga1

    who put my name up there

  • Layout Creator
  • PipPip
  • 546 posts

Posted 21 January 2012 - 11:57 AM

thanks for the the link dad

nice one
always on the scrounge for freebies.

#8 mort

mort

    Layout Designer

  • Layout Creator
  • Pip
  • 354 posts

Posted 21 January 2012 - 12:36 PM

don't be put off though mate, if you are enjoying creating the layout then go ahead with it :)

Edited by mort, 21 January 2012 - 12:37 PM.


#9 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 21 January 2012 - 01:37 PM

I agree with mort.......Just so you know though.

http://www.fruit-emu...jpm-five-liner/

moco also did a version.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users