Monopoly 60th Anniversary Edition 20p £10

It needs checkbox 70 and 71 for the tube level sensors to be full.

Hi Richy

And where are they on the slot??

Jay

Still not had jacky on it myself yet.

To make tubes full you need to go to design then edit mode at the top.

Then right click your mouse by the top of the machine at the left, out of the menu that comes up, you highlight buttons, then press on checkbox, a checkbox will appear were you can tick it.

You have to do properties on this checkbox, put 70 in the properties number and click apply then close, do the same again make it checkbox 71.

Make sure they are ticked and restart layout saving

Still not had jacky on it myself yet.

To make tubes full you need to go to design then edit mode at the top.

Then right click your mouse by the top of the machine at the left, out of the menu that comes up, you highlight buttons, then press on checkbox, a checkbox will appear were you can tick it.

You have to do properties on this checkbox, put 70 in the properties number and click apply then close, do the same again make it checkbox 71.

Make sure they are ticked and restart layout saving

Hi mate

Uve completely lost me now-and it don't take much to do that.

I now have the layout with 159 numbered boxes ad I can't get them off the slot

I'm as thick as a wall when it comes to tech and don't understand any of the above

Jay

PM gemini.

Its also on a whitbread rom, i cant find another that £10 cash.

hmm, thought something was off i will update the switches, as for the rom this was the only £10 one i could find i will have another look.

hmm, thought something was off i will update the switches, as for the rom this was the only £10 one i could find i will have another look.

I'l save some virtual money now  

Jay

cannot sign up for this

PM gemini.

Its also on a whitbread rom, i cant find another that £10 cash.

Hi Richy

For some reason can't access my messages to pm you!

Ive just noticed the version you kindly uploaded for me has the same fault as the original release.

It pays £10 on the reel jackpot but only £8 on the feature board-so sadly plays just the same and 

blocks all possibilities of wins above £4

Maybe the only solution is to make the slot £8 jackpot??

Jay

The £15 roms in the 1024 release switch to £10 via the dip switches  and check boxes. Also the later £8 token versions will switch too. Still can't get to my pc to change it,if you still haven't had a jackpot then the machine is still running with a token setting. Played a roller coaster like this in 99 that had this problem and wouldn't pay anything more than 4 pound.

Create check boxes from button 60 through to 71 and see if that changes the game play for you's. 

Edited by richy1976, 07 May 2019 - 08:36 AM.

Must still payout the jackpot eventually though

It's impossible Vectra as the machine is almost playing two different jackpot roms within the same slot!

I'm up to £800 in now between three slots and each slot is running at around 20%!!,if that.

£8 token Jackpot on the feature board and £10 Jackpot on the reels.

The two appear to block one another so it stops wins above £4-I don't know but I would imagine

it would eventually crash!!,if it could pay above the £4 but I don't think we would ever see it lol

Jay

The £15 roms in the 1024 release switch to £10 via the dip switches  and check boxes. Also the later £8 token versions will switch too. Still can't get to my pc to change it,if you still haven't had a jackpot then the machine is still running with a token setting. Played a roller coaster like this in 99 that had this problem and wouldn't pay anything more than 4 pound.

Create check boxes from button 60 through to 71 and see if that changes the game play for you's. 

Thanks mate for the info will try have a go later.

I have a vague recollection of a Roller Coaster slot too that did the same in an arcade in Leeds,everything blcked above £4 the slot was 10 play-£8 cash jackpot but the board was clearly an £8 token setting.!!

Jay

If no one has sorted it b2fore I get back tonight I will sort a Rom that will pay the jackpot. The jackpots don't matter there are other barcrest machines that pay 8 pound for red 7s but if you get around the board the jackpot is still 6 pound lol just lazy coding. 

I have a r3d crazy fruits layout waiting for a release,I've set it to £15 jackpot. This is also a Whitbread Rom and plays very peculiar, it doesn't like going below a certain % before forcing a jackpot on you.

If no one has sorted it b2fore I get back tonight I will sort a Rom that will pay the jackpot. The jackpots don't matter there are other barcrest machines that pay 8 pound for red 7s but if you get around the board the jackpot is still 6 pound lol just lazy coding. 

 

I have a r3d crazy fruits layout waiting for a release,I've set it to £15 jackpot. This is also a Whitbread Rom and plays very peculiar, it doesn't like going below a certain % before forcing a jackpot on you.

Great stuff Tommy.

It must be just JP'Ms that struggle with this-as whatever I try none of the slots will pay above £4,with the settings they have

They are amazing slots and i'm not taking anything away from any of the creators as it's the slot that has the faults within them.

Many thanks

Jay

Ok i've sorted the issue out and sent ross a copy of the layout with some proper £10 jp roms in,it's his layout so i'm not going to upload the fixed version i have in to this thread

First £3 in

Updated zip uploaded, download again for latest version Cheers Tommy, plays a much better game now. got the top set within £6

Edited by ross, 07 May 2019 - 06:39 PM.

Btw stunning redraw ,looks first class really does.

Btw stunning redraw ,looks first class really does.

Many thanks to Ross and Tommy for sorting the probs out.

I'l try claw back some of my money now lol    

Jay