Help with power supply change.
Started by
Twostroker
, Jan 02 2018 05:46 PM
7 replies to this topic
#1
Posted 02 January 2018 - 05:46 PM
Hi are all scorpion4 power supplies compatable?
I'm looking at replacing a-
Sanken Gsk017ha marked unit. (Smiley cab)
With a known working-
Sanken Sps040h (eclipse cab)
Both look identical with identical fittings. Only the wiring into the connectors look different in the larger connector blocks between the to cab looms.
Not done this before so thought I'd better check?
I'm looking at replacing a-
Sanken Gsk017ha marked unit. (Smiley cab)
With a known working-
Sanken Sps040h (eclipse cab)
Both look identical with identical fittings. Only the wiring into the connectors look different in the larger connector blocks between the to cab looms.
Not done this before so thought I'd better check?
- Twostroker likes this
#2
Posted 02 January 2018 - 06:12 PM
Looks like one black 12v wire now goes into a pin marked +5 on the replacement psu?
#3
Posted 02 January 2018 - 08:37 PM
From memory they are ostensibly the same but one of the wires has to be changed. I’ll try to remember or dig out the details.
#4
Posted 02 January 2018 - 09:51 PM
Cheers that would be great
#5
Posted 03 January 2018 - 02:04 PM
Looked at this again today and think it's the two outter most red wires 12v on the right are going the wrong pins on the new psu (a.c. stable and +5) so moved them inside to other free pins marked 12v. Does ring any bells?
#6
Posted 03 January 2018 - 02:43 PM
Looked at this again today and think it's the two outter most red wires 12v on the right are going the wrong pins on the new psu (a.c. stable and +5) so moved them inside to other free pins marked 12v. Does ring any bells?
Not really, can you do a diagram or annotate a photo?
#7
Posted 03 January 2018 - 04:55 PM
Eclipse psu outputs
Sticker
1 a.c. sync
2 +5
3 12v
4 12v
5 12v
6 12v
7 12v
8 12v
9 rtn
10 rtn
11 rtn
12 rtn
Smiley loom demands
Sticker loom connector
1 12v Redwire
2 12v Redwire
3 12v Redwire
4 12v redwire
5 12v
6 12v
7 12v
8 12v
9 Rtn blackwire
10 rtn blackwire
11 rtn blackwire
12 rtn blackwire
Hi this is what I have to work with. I'm thinking I could change the red wires in pins 1 and 2 connector To 5 and 6 to rematch the supply? Not done this type of work before though?
Eclipse psu outputs
Sticker
1 a.c. sync
2 +5
3 12v
4 12v
5 12v
6 12v
7 12v
8 12v
9 rtn
10 rtn
11 rtn
12 rtn
Smiley loom demands
Sticker loom connector
1 12v Redwire
2 12v Redwire
3 12v Redwire
4 12v redwire
5 12v
6 12v
7 12v
8 12v
9 Rtn blackwire
10 rtn blackwire
11 rtn blackwire
12 rtn blackwire
Hi this is what I have to work with. I'm thinking I could change the red wires in pins 1 and 2 connector To 5 and 6 to rematch the supply? Not done this type of work before though?
Sticker
1 a.c. sync
2 +5
3 12v
4 12v
5 12v
6 12v
7 12v
8 12v
9 rtn
10 rtn
11 rtn
12 rtn
Smiley loom demands
Sticker loom connector
1 12v Redwire
2 12v Redwire
3 12v Redwire
4 12v redwire
5 12v
6 12v
7 12v
8 12v
9 Rtn blackwire
10 rtn blackwire
11 rtn blackwire
12 rtn blackwire
Hi this is what I have to work with. I'm thinking I could change the red wires in pins 1 and 2 connector To 5 and 6 to rematch the supply? Not done this type of work before though?
Eclipse psu outputs
Sticker
1 a.c. sync
2 +5
3 12v
4 12v
5 12v
6 12v
7 12v
8 12v
9 rtn
10 rtn
11 rtn
12 rtn
Smiley loom demands
Sticker loom connector
1 12v Redwire
2 12v Redwire
3 12v Redwire
4 12v redwire
5 12v
6 12v
7 12v
8 12v
9 Rtn blackwire
10 rtn blackwire
11 rtn blackwire
12 rtn blackwire
Hi this is what I have to work with. I'm thinking I could change the red wires in pins 1 and 2 connector To 5 and 6 to rematch the supply? Not done this type of work before though?
#8
Posted 05 January 2018 - 07:19 PM
If anyone tries this in the future it works ok
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users