10 replies to this topic

[wubbster]

Hi guys, just preping my Barcrest Triple 7 slot to sell it and now getting the No Signal error as of today. I was playing it 2 days ago so was fine then. I know very very little about the tech side of things but done what research I can and no info on this error. It obviously suggests there is an issue from the pc to the monitors as both show the error. Any help you guys can give would be great. (Pic of slot is in case you didn't know which it was, when on the screens are blue with the "no Signal" across front of each monitor). Video attached.

Attached Files

•  Video 29-01-2020, 14 20 56.mov   69.49MB   28 downloads
•  Photo 17-09-2019, 20 25 20.jpg   125.9KB   1 downloads

Edited by wubbster, 29 January 2020 - 02:35 PM.

[chasnbons]

I had something similar with mine.

The motherboard had gone and taken the PC's power supply with it.

Is the high pitched noise coming from the PC?

Is the PC's reset light showing as constant red or flashing red?

Do you get the beep from the PC as it's booting up?

As much info as possible, maybe a video of it booting, will make it easier for people to help.

Mines reset light was constant red, and I also had the same flashing red light on my monitor same as yours.

[wubbster]

I had something similar with mine.

The motherboard had gone and taken the PC's power supply with it.

Is the high pitched noise coming from the PC?

Is the PC's reset light showing as constant red or flashing red?

Do you get the beep from the PC as it's booting up?

As much info as possible, maybe a video of it booting, will make it easier for people to help.

Mines reset light was constant red, and I also had the same flashing red light on my monitor same as yours.

Thanks for info, will take a new video. Its so weird as never any issues until the moment i decide to buy it!

[wubbster]

I mean no problems until I decide to SELL it.

[chasnbons]

That's usually the case lol.

Mine was fine when I turned it off the night before.

Flick the switch the following morning.... dead as a dodo, but that's what happens with PC's sadly.

160 mile round trip and wallet 180 quid lighter and all was well again.

[wubbster]

So its not an easy fix?

[wubbster]

So I opened the PC part and gave it a clean, it was filthy, put it back and same error. Here is a video before I cleaned, and some photos.

Attached Files

•  Photo 30-01-2020, 14 40 29.jpg   197.13KB   5 downloads
•  Photo 30-01-2020, 14 40 34.jpg   266.13KB   3 downloads
•  Photo 30-01-2020, 14 40 37.jpg   205.25KB   2 downloads
•  Photo 30-01-2020, 14 40 39.jpg   148.79KB   3 downloads
•  Photo 30-01-2020, 14 47 44.jpg   155.13KB   1 downloads
•  Video 30-01-2020, 14 26 41.mov   83.33MB   33 downloads

[chasnbons]

Just had a look at the video and it looks exactly like the problem spa had which is documented over at DIF, if you're a member there.

It was his gfx card that was shot.

[wubbster]

Just had a look at the video and it looks exactly like the problem spa had which is documented over at DIF, if you're a member there.

It was his gfx card that was shot.

I don't think I am a member, is there somewhere you can link me please. Thank you for your help.

[chasnbons]

http://www.desertislandfruits.com

[wubbster]

Sorry yeah I am a member, will have a look through the forums for the solution!