Jump to content


Member Since 18 Feb 2009
Offline Last Active Nov 07 2018 05:27 pm

Topics I've Started

Barcrest ERio Machine possibly for sale.

26 November 2017 - 03:29 pm

To save me saying the same thing in reply to various PM's...


As the title says...


Attached File  HPIM5167.JPG   271.47KB   2 downloads Attached File  HPIM5168.JPG   250.92KB   1 downloads


The machine is fully working with 20 games all playing in real cash mode.


Attached File  HPIM5102.JPG   129.63KB   0 downloads Attached File  HPIM5103.JPG   115.51KB   1 downloads


It comes with a few spares as pictured (a couple of buttons, coin entry slot and on/off switch, plus 8 (including the one currently in the machine) game cards with chips, one of which is for Lucky Strike Cat C/D which is VERY rare!  All cards work but the Cat C/D ones will need their batteries charging as they haven't been used for a while due to those games being on the 'all in one' chip that's been in the machine since I got it, and a spare HDD.


Attached File  HPIM5169.JPG   164.64KB   1 downloads


An extra chip which has (if I remember correctly) has some, if not all the Cat C/D games on and the T7 games which the machine will play, on.  This might not be 100% correct as I can't fully remember without trying each of the games individually.


Also there's an extra chip which although it is marked up as being for a sit down Elvis cab, might not be!


The machine will have to be split down into 3 pieces to be removed from out house as we only have a narrow front door, but this only takes a few minutes and is easy to do.  Just 4 bolts and the wires which go to the bottom of machine for door switch and meters need removing.


Pics to show what would need plugging back in once machine is back together.


Attached File  HPIM5170.JPG   179.62KB   1 downloads Attached File  HPIM5171.JPG   113.2KB   1 downloads


Any questions will be answered as honestly as possible and the machine is COLLECTION ONLY and is in Stoke on Trent.


I am open to serious offers which can be made via PM if you prefer and you are more than welcome to come and see it working etc before buying



Taiko Pub7 Note Acceptor

11 August 2017 - 05:05 pm

Hi guys


Does anyone have a PUB7 notey running on MPU5 that could supply me with a pic of the loom from the notey to the machine please?


I need to see the pins at both ends to see the wiring config clearly.


This it quite urgent so any help would be great.






Edited to add it needs to be in serial mode NOT CCTalk, pref ID 003

Scorpion 4 Note Acceptor Loom

15 February 2017 - 07:10 am



I'm after a scorpion 4 notey loom, the half that goes to the scorp board for a mate if anyone has one spare.


He has the part that came with the notey, but his machine hasn't got the other half in it.


Can anyone help please?



Note acceptor loom

14 February 2017 - 07:06 am



Has anyone got a Taiko note acceptor loom please who would be willing to take some close up pics of it?


I need to see the wiring in the plugs at both ends.


Also if anyone has a spare one could they let me know.



Note Acceptor Problem

15 January 2016 - 07:14 pm

Has anybody any ideas on why the JCM note acceptor in my Enhanced Rio might have stopped working please?


It's been fine and then suddenly the lights on the front don't light up and it won't accept notes.


When I put it in test the lights illuminate and it accepts all notes correctly, but as soon as I close the door it's dead again.


Nothing on the machine has been changed and on switch on it initialises like it's always done, but once machine has finished booting.... nothing :(


Been messing with it for well over and hour but can't get any joy, there's no trapped or dodgy looking wires, so I really have no clue as to what's gone wrong.