Jump to content


chasnbons

Member Since 18 Feb 2009
Offline Last Active Private
-----

Fruit-Emu Shoutbox 414 Shouts

(24 August 2013 - 07:21 am) @ady ??, don't understand mate, but it's still a bit early for my brain to function properly ;)
(23 August 2013 - 06:24 pm) @cooperman1210 it says you're still validating, have you clicked the link on the email it send you? It might be in your junk folder
(28 July 2013 - 06:31 pm) @mainjohn yes they have, with all the other bpaks installed, I was watching that as well
(19 June 2013 - 08:02 pm) plus it's my birthday on Sat, so that's something else to look forward to........ not!
(19 June 2013 - 08:02 pm) it don't matter to me if it pisses down all week vecs, I'll still be on the beach with the dog
(19 June 2013 - 08:00 pm) just checked streetview and they haven't changed the pics.... you can still see the van
(19 June 2013 - 08:00 pm) lmao
(19 June 2013 - 07:57 pm) Yes I've looked on streetview, but not for a while, wonder if they've changed the pics.... hang on brb
(19 June 2013 - 07:55 pm) lmao, it's just outside Rhyl, but loads cleaner ;)
(19 June 2013 - 07:52 pm) Destination is neither far off or exotic, off down to the caravan for a week... Kinmel Bay, North Wales
(19 June 2013 - 07:40 pm) well that's it, all my packing done, ready for hols
(19 June 2013 - 07:38 pm) hi vecs
(19 June 2013 - 07:37 pm) evening :)
(19 June 2013 - 04:15 pm) @Jayzeewood, you might find you get better responses if you use the odd please and thank your in you posts, manners cost nothing but will get you a long way in this world :skeptical:
(14 June 2013 - 07:44 am) I'd never heard of it till you mentioned it, and now I'm desperate to know more if it's the last of the set ie SS PT & HP
(14 June 2013 - 07:41 am) hope they're out there somewhere and we just haven't come across them yet
(14 June 2013 - 07:39 am) don't be rude vecs, I'm on about Ians go at sorting a flyer out :p
(14 June 2013 - 07:37 am) @vectra666 well I'm devastated now, you raised my hopes only to let me down again, where's that sharp knife gone ;)
(14 June 2013 - 07:36 am) looks fine to me, but then what do I know.... I don't do straight ;)
(14 June 2013 - 07:33 am) lmao I was too late
(14 June 2013 - 07:33 am) well done mate, let's have a look then
(14 June 2013 - 07:31 am) yes vecs you lol, you posted on Mecca in the Hey Presto thread
(14 June 2013 - 07:29 am) you got me very curious now, I wanna know all the info you have on shogun :)
(14 June 2013 - 07:26 am) morning vecs
(14 June 2013 - 07:26 am) @IHartwell .. no excuse to be on here tho, get swatting for the interviews and practicing you speech for Saturday :p
(13 June 2013 - 09:39 am) @vectra666 lmao.... well MOST of us are real ;)
(13 June 2013 - 09:38 am) Rite gotta go out in a min so if I vanish, you know why
(13 June 2013 - 09:38 am) @Jayzeewood Yes mate
(13 June 2013 - 09:38 am) PM sent Ian
(13 June 2013 - 09:27 am) Not got any machines here atm that are fly wired, might have a pic somewhere though.... hang on a min
(13 June 2013 - 09:26 am) Just bear in mind that any leakages will go downwards, so don't fasten it above ANY boards etc
(13 June 2013 - 09:24 am) I always connect all 3 wires mate, my mind tells me they're there for a reason
(13 June 2013 - 09:24 am) store it wherever is convenient, I'v taped them anywhere before now, but away from the board, and usually in a plastic container or something
(13 June 2013 - 09:23 am) sorry been on fone
(13 June 2013 - 09:17 am) minds even
(13 June 2013 - 09:17 am) lmao Ben.. great mids etc :)
(13 June 2013 - 09:15 am) Remember to fly wire it to save any leakage problems later on ;)
(13 June 2013 - 09:15 am) @IHartwell You still not got that bit sorted yet mate?
(11 June 2013 - 07:47 pm) @IHartwell dump the hopper, it looks like the machine thinks it's full mate
(10 June 2013 - 09:50 pm) just loaded FF instead of IE and it's all working fine
(10 June 2013 - 09:47 pm) this is the only site I ever have problems with
(10 June 2013 - 09:47 pm) right it's done it now, but it's STILL the same
(10 June 2013 - 09:44 pm) rite it now says... error incomplete or unrecognized command line
(10 June 2013 - 09:34 pm) that should say elevation not elevating
(10 June 2013 - 09:33 pm) tinterweb says do it in command prompt, but when I try it says it needs elevating, wtf does that mean?
(10 June 2013 - 09:31 pm) just done that but it's still the same
(10 June 2013 - 09:19 pm) I seem to remember dns being mentioned before
(10 June 2013 - 09:11 pm) I can always get access (it's ALWAYS slower than anywhere else tho) but now it's started doing what it did before again the menu at top of this page is shagged, dropdowns drop but with nothing showing in them etc
(10 June 2013 - 09:10 pm) I'm ok thanks vecs, apart from not being able to get the site to work properly
(10 June 2013 - 09:06 pm) on desktop rdp mate
(10 June 2013 - 09:05 pm) No Ian, it was the links to different parts of the site and stuff, that were playing up
(10 June 2013 - 09:03 pm) All the buttons on top of this page, ie home forum downloads etc are all messed up and if I try and click on my name at the top of page the dropdown box is there but I can't read any of it
(10 June 2013 - 09:01 pm) I had the same problem and did what had been advised and it fixed it, but I've now got the same probs and I can't find the thread
(10 June 2013 - 09:01 pm) Does anyone remember the thread a few weeks/months ago when someone was having probs with the site and they were advised what to do?
(10 June 2013 - 10:36 am) See ya rdp, I'm off too, fish fingers will need eating soon :)
(10 June 2013 - 10:30 am) Just been for a look in freezer, and joy of joys, there are some fish fingers in there, well they were in there, they're just about to go in the pan now :)
(10 June 2013 - 10:25 am) OMG that's far too much info for a sensitive homosexual like myself! ;)
(10 June 2013 - 10:24 am) Starting to feel quite ill now with all this talk of ladies shaving habits.... or lack of
(10 June 2013 - 10:24 am) deffo with rdp.... thanks
(10 June 2013 - 10:22 am) Oh and talking of sandwiches, I went to a fancy dress party at the weekend as a loaf of bread.... the birds were all over me :p
(10 June 2013 - 10:21 am) I could just manage a cpl of those rdp
(10 June 2013 - 10:20 am) Has she?
(10 June 2013 - 10:11 am) Nowadays I say very little, compared to what I used to say, but what I DO say is the truth and if people don't like it, then it's tough I refuse to comply just to apease the masses
(10 June 2013 - 10:09 am) The trouble is, once you upset someone one here, that seems to be it, and yes I'm speaking from experience
(10 June 2013 - 10:06 am) @ IHartwell, nothing wrong with a bit of rudeness, it's much better than being miserable mate
(10 June 2013 - 10:04 am) I'd noticed that vecs, and like I said I don't know everything that's gone on, but the one thing I DO know, is, I'd have said bollox to it ages ago mate
(10 June 2013 - 10:03 am) Like I said just my opinion, but if others who are thinking of having a go, see the sort of comments vecs sometimes get, surely it would put them off, I KNOW it would me.
(10 June 2013 - 10:02 am) His releases might not be 100% perfect, but at least imo he's trying and something has got to be better than nothing, there doesn't seem to be much happening with the scene lately, so surely new releases or whatever should be welcomed rather than people having a go.
(10 June 2013 - 10:00 am) Ok, so I'll probs get slated for this, and I know I don't know all the 'ins and outs' of everything, but why lately, does it always seem to be.. 'have a dig at vectra day'?
(14 May 2013 - 08:46 pm) Steve you're getting to me now with all this bragging, just bear in mind I'll see them before you do :p
(15 March 2013 - 09:38 am) Thank God for the block button! ;)
(15 March 2013 - 09:34 am) Don't you just hate it when you get asked something in a pm, you answer to the best of your ability, the other person reads it, and you don't even get a thankyou :realmad:
(21 February 2013 - 09:07 am) :)
(21 February 2013 - 09:00 am) :o Oh sorry, I hadn't read your last post before I pressed 'shout'.... I'll shut up lol
(21 February 2013 - 08:58 am) I've got pm's that say deleted, (with a big red 'deleted' banner), but like has been said, it only means the other party has deleted it, I can still read what was sent.... until I delete it as well, just can't reply to it anymore that's all, just wanted to say, so that you know it's not just you 2 vecs :)
(18 January 2013 - 05:06 pm) We've got about 18 inches now..... still on about the snow :lol:
(18 January 2013 - 05:05 pm) On this occasion yes Gazza I was sorry to disappoint ;)
(18 January 2013 - 02:51 pm) @ Daryl not too bad thanks mate, you have to keep going and as for the innudeno... chance would be a fine thing mate, hope you're well mate :)
(18 January 2013 - 01:07 pm) 6 inches and counting in Stoke!
(18 December 2012 - 06:47 pm) Most definately ;)
(18 December 2012 - 06:44 pm) Oh ok thanks.... I've not gone totally senile then.... yet!
(18 December 2012 - 06:40 pm) I thought the draw was on Sat 22nd?... Or did I read it wrong?
(03 December 2012 - 09:35 am) I'm in Stoke and never saw any snow, not one flake, let alone 4 feet! All it did was rain here last night.
(20 November 2012 - 05:57 pm) .
(20 November 2012 - 05:52 pm) if anyone can see this PLEASE say so
(20 November 2012 - 05:50 pm) Just looked at a thread and when I came back to homepage shoutbox has gone back to 18th Nov @ 10.53pm ...vectra saying 'nite all'???
(20 November 2012 - 05:47 pm) The shoutbox has just updated when I posted, 1st time in 2 days, but it still shows as only me being here?
(20 November 2012 - 05:46 pm) Is anyone else having probs with the site please? For the last 2 days it's only been showing me as being online, when clearly there's other people on here :goofy:
(15 June 2012 - 06:10 pm) oh well ANOTHER day sitting in waiting by the looks of it :mad:
(15 June 2012 - 06:09 pm) I've only got a parceltogo number, and yodels website is crap, I emailed them this morning and I'm still waiting for a reply
(15 June 2012 - 06:03 pm) they better deliver, they've got the pc out of my cashino :err:
(15 June 2012 - 05:54 pm) does anyone know if yodel48 deliver on a Saturday pls?
(14 June 2012 - 03:52 pm) Bet it was a novelty though
(14 June 2012 - 03:51 pm) Not really mate
(14 June 2012 - 03:49 pm) Wish I'd seen the dead birds trying to fly through it......
(08 June 2012 - 09:16 am) game files to load onto a Rio cab, the £500 JP ones and some CatC/D as well
(08 June 2012 - 09:14 am) mind you, they taking forever so don't expect them any time soon :twitcy:
(08 June 2012 - 09:13 am) bloody hell I got repro to work for me, so just upping some new bpaks :spinny:
(18 April 2012 - 09:25 am) vectra just about to set off to PO m8, now that it's actually STOPPED pi55ing down!
(17 April 2012 - 05:49 pm) vectra check your pm's m8
(08 February 2012 - 06:45 pm) alan that card I was on about that didn't sell was Monty Python
(08 February 2012 - 06:40 pm) put a post in for sale/wanted someone might be after one
(08 February 2012 - 06:39 pm) that's where I'm off now, there must be someone I can abuse on there by now :biglaugh:
(08 February 2012 - 06:36 pm) better asking at Mecca alan, more collectors/repairers etc there m8
(08 February 2012 - 06:35 pm) cya todd
(08 February 2012 - 06:35 pm) actually thinking about it.... I do...... stan the man marsh
(08 February 2012 - 06:32 pm) wish I knew someone in the know
(08 February 2012 - 06:27 pm) i started at about 14 and I'm 48 now
(08 February 2012 - 06:24 pm) me neither
(08 February 2012 - 06:23 pm) very true
(08 February 2012 - 06:23 pm) you did well there m8...... a whole hour! I'd have been stressed after about 15 mins
(08 February 2012 - 06:21 pm) did you get ya fags todd?
(08 February 2012 - 06:20 pm) just realised I didn't tell you, I've put a list in as to which game is which Cat, cos they not always obvious
(08 February 2012 - 06:19 pm) behave yourself lol, cheers m8 but there's no need
(08 February 2012 - 02:25 pm) but if you reply to PM before you go, it would be a help m8
(08 February 2012 - 02:24 pm) I should be back after teatime, but can't promise as it all depends on whether Virgin Media sort my internet out
(08 February 2012 - 02:17 pm) gonna PM you m8
(08 February 2012 - 02:15 pm) Oh not much I can do then m8, unless you live near stoke
(08 February 2012 - 02:06 pm) did you understand what I put in the PM?
(08 February 2012 - 02:04 pm) i just tried the link on here but it won't go in, so try that link m8
(08 February 2012 - 02:04 pm) http://reproserv.no-ip.org/forum.ghp
(08 February 2012 - 01:32 pm) pm replied to alan
(08 February 2012 - 01:03 pm) why did that post twice?
(08 February 2012 - 01:03 pm) sent ya a pouch of baccy m8, should keep you going till teatime
(08 February 2012 - 01:01 pm) i got roll ups todd if that's any good m8
(08 February 2012 - 12:56 pm) AT ALAN7669... you need the correct bpak installed and also the game card and pik chip. Bpak it available on repro
(18 November 2011 - 01:31 pm) what's blown what? 12 mths?
(16 November 2011 - 11:25 am) morning all
(09 November 2011 - 07:09 pm) i'm not dead
(09 November 2011 - 06:31 pm) think i might have sorted it, will give it a go, if i'm not back in 15 mins dial 999 pls
(09 November 2011 - 06:30 pm) i'd end up with a perm
(09 November 2011 - 06:30 pm) NOOOOOOOO
(09 November 2011 - 06:27 pm) thanks todd, but I only want to know what voltage to put it on to test my PSU
(09 November 2011 - 06:26 pm) laters
(09 November 2011 - 06:26 pm) have a nice time m8
(09 November 2011 - 06:24 pm) anyone else?
(09 November 2011 - 06:24 pm) ok m8 thanks
(09 November 2011 - 06:23 pm) is anyone good with a multimeter pls?
(09 November 2011 - 06:22 pm) evening all
(06 November 2011 - 02:56 pm) nails, if you there m8, I just sent you a PM, hope you understand what I'm on about :)
(03 November 2011 - 04:22 pm) bradley12345... : shut the f**k up (03 November 2011 - 03:27 PM).... was this aimed at me?
(03 November 2011 - 02:53 pm) and unless he tries to use a BIT of common sense he's gonna stay one
(03 November 2011 - 02:51 pm) erm let's see.... i want to know how to do stuff... maybe i'll find the info in tutorials.... i want a machine to play.... maybe i'd find one in the downloads section.... it's not rocket science, if you managed to get here in the 1st place i'm sure you can manage to look at the info that's here m8
(03 November 2011 - 02:48 pm) sheesh some ppl want their @rses wiping
(03 November 2011 - 02:47 pm) tell you what bradley, instead of just expecting help, try looking for yourself, all the info is there if you take the time to look
(03 November 2011 - 02:46 pm) and while you're at it get some patience at the same time
(03 November 2011 - 02:45 pm) sodding hell get a grip!
(03 November 2011 - 02:45 pm) have you downloaded any emulators yet? you need them to be able to play the machines, all this info is available if you look
(03 November 2011 - 02:43 pm) there's hundreds of machines on here to download and play... all for free, what more do you want!
(03 November 2011 - 02:40 pm) click where it says add to cart
(03 November 2011 - 02:33 pm) the 10 spins are so you can see if you like the simulation and if you do you then have to buy it to carry on playing it
(03 November 2011 - 02:31 pm) gambogaz1 : Most of em give you 10 free spins then you have to purchase the sim (03 November 2011 - 12:45 PM You were told 2 hours ago that they gave you 10 free spins
(30 September 2011 - 01:27 pm) or send cliffc a PM
(30 September 2011 - 09:07 am) maybe it's ill :)
(30 September 2011 - 08:35 am) mines light blue down both sides and where SB, Latest News etc is, is white
(29 September 2011 - 03:01 pm) you make it sound SO easy rob, but you're dealing with an idiot where the insides of a PC are concerned :err:
(29 September 2011 - 01:34 pm) hmmm it would seem that technical hour is over, story of my life :bigeyes24:
(29 September 2011 - 01:28 pm) or would it only be some of what's on my HD now?
(29 September 2011 - 01:28 pm) also although I got my files backedup to an external HD, how much exactly would be saved, if I got a new HD would backup restore the new one to how the current one is?
(29 September 2011 - 01:26 pm) keeps crashing and chekdisk keeps running when I start PC up, but then it says there's no problems
(29 September 2011 - 01:25 pm) seeing as this is technical hour, how hard would it be to change my HD, I think the one in PC is on its way out
(29 September 2011 - 01:24 pm) wish I had a clue what all that means
(28 September 2011 - 08:44 am) I seen it happen for other people Tommy m8, but never for me :(
(28 September 2011 - 08:08 am) Rob did you get your machine sorted in the end?
(28 September 2011 - 08:02 am) think my RR is broke, it gave me pots THREE!! times last night 2x500 and 1x 400 why does this NEVER happen to me in the wild :realmad:
(28 September 2011 - 08:00 am) unless the PM is telling him that he's banned again, can't see that it'll do any good... once a nob always a nob :jimlad:
(24 September 2011 - 09:05 am) somebody telling fibs me thinks!
(24 September 2011 - 09:03 am) hmmm think it's strange that, no-one aparently knows where yet, surely somebody somewhere saw something
(24 September 2011 - 08:59 am) if it has landed there can't have been any/much damage as I can't find anything on the news channels
(24 September 2011 - 08:57 am) I thought that info was about the re-entry into earths atmophere, not the actual crash
(24 September 2011 - 08:42 am) I'm totally confused with this thing, if it's down why is this site still tracking it? http://www.infosatel...orad-21701.html
(27 August 2011 - 12:23 pm) :yes:
(27 August 2011 - 12:21 pm) just had a nice storm here for all of 10 mins!
(24 August 2011 - 04:09 pm) does anyone know why my avatar would be working in my profile but nowhere else?
(24 August 2011 - 04:00 pm) it's rained here 3 times today... every time was just as i'd got the mower out! :realmad:
(24 August 2011 - 12:30 pm) never mind i got it sorted now i think!
(24 August 2011 - 11:59 am) did have nvidea but it seems to have gone
(24 August 2011 - 11:59 am) don't know what i done or whats happened but everything is diff to how it was and all very jumpy
(24 August 2011 - 11:58 am) can anyone help me with pc graphics pls?
(19 August 2011 - 07:01 pm) oh good least still somewhere to go then
(19 August 2011 - 06:58 pm) does switch over just affect here or Mecca as well pls?
(19 August 2011 - 12:55 pm) so basically mach2000, mpu4, pmu4 plasma, mpu4 video, epoch and mmm
(19 August 2011 - 12:55 pm) it shows the following running, castle revolution, jpm strike it lucky swp, barcrest big chief, simpsons, cash or nudge crystal club bullion, miami dice vid screen, haunted house, cash bolt and space invaders vid
(19 August 2011 - 12:45 pm) i believe the maestro if gonna sort your machine for you
(19 August 2011 - 12:44 pm) hi rob m8
(19 August 2011 - 12:43 pm) no m8
(19 August 2011 - 12:42 pm) there's already been too much aggro about that vid
(19 August 2011 - 12:41 pm) i got it, but if it's been removed there must be a reason for removal, so don't wanna post it anywhere public so as not to upset anyone
(19 August 2011 - 12:40 pm) only kidding
(19 August 2011 - 12:39 pm) sorry not got that one :biglaugh:
(19 August 2011 - 12:36 pm) which one cos i named 2?
(19 August 2011 - 12:35 pm) yah what?
(19 August 2011 - 12:33 pm) or summat else?
(19 August 2011 - 12:33 pm) do you mean the one which was called ....look at what you could have had... or the blues one?
(19 August 2011 - 12:29 pm) :biglaugh:
(18 August 2011 - 01:22 pm) right gotta take dog out and then start tea, cya lata m8 and good luck
(18 August 2011 - 01:20 pm) look forward to loads of pics later then
(18 August 2011 - 01:19 pm) lmfao
(18 August 2011 - 01:12 pm) i'm sure that will work :biglaugh:
(18 August 2011 - 01:11 pm) tell her it's of the utmost importance as you need bandit working so you can start saving for the wedding :wideeyed:
(18 August 2011 - 01:10 pm) see you learning already
(18 August 2011 - 01:08 pm) ello DAD, hows you m8?
(18 August 2011 - 01:07 pm) it should then just click when the bottom nodule goes into plastic clip
(18 August 2011 - 01:07 pm) i find easiest way to put it back is line it up with bracket whilst having index fringer of left hand on top black nodule that holds it in place and then just drop it down
(18 August 2011 - 01:03 pm) easier still if you still got reels out
(18 August 2011 - 01:03 pm) usually just either push or pull plastic clip thats sort of sideways, away from metal mounting bracket, lift coin mech up and ease it out to the left, quite easy really
(18 August 2011 - 01:01 pm) what sort is it?
(18 August 2011 - 12:56 pm) well thats something you CAN be doing clean all the inside, the less dust etc the better, it acts like a blanket and keeps the heat in which might cause problems later
(18 August 2011 - 12:55 pm) best get round a borrow a camera then m8
(18 August 2011 - 12:53 pm) dread to think what state cashino would have been in after all them steps, fortunately i live in a bungalow :jiggy:
(18 August 2011 - 12:50 pm) that should do m8, then post pics in your thread at mecca and wait for replys
(18 August 2011 - 12:43 pm) 30 quid is cheap, if you have to spend a bit on it, least you have a decent machine at end of day
(18 August 2011 - 12:42 pm) loads of wires pulled out, not a clue where they were supposed to go, but managed to sort it in the end.... only took a week!
(18 August 2011 - 12:41 pm) top completely seperate from the bottom
(18 August 2011 - 12:41 pm) when we were carrying cashino through my front door the whole thing slpit in two
(18 August 2011 - 12:40 pm) only 20
(18 August 2011 - 12:40 pm) it WILL get sorted m8, it just takes time
(18 August 2011 - 12:39 pm) just think yourself lucky you didnt buy the cashino that i bought
(18 August 2011 - 12:39 pm) i had probs with all but 1 of my machines when i got them home
(18 August 2011 - 12:38 pm) if owt like me prob about a 12 lol
(18 August 2011 - 12:38 pm) on a scale of 1 to 10 how stressed are you? :wideeyed:
(18 August 2011 - 12:36 pm) do the 2 rusty conns still look like they fused together?
(18 August 2011 - 12:33 pm) ask in your thread if anyone's near and could come have a look at it for you
(18 August 2011 - 12:33 pm) can't think of anyone who's in bristol off top of my head
(18 August 2011 - 12:32 pm) ended up taking it over to marks place (stanmarsh) he swapped me his board and i left him my 2 which he and john disco managed to get sorted
(18 August 2011 - 12:31 pm) turned out that the previous battery had done damage and that's what the prob was
(18 August 2011 - 12:30 pm) i had probs with my crazy fruits... it had a new battery on it when i got it, but after a few weeks if started playing up
(18 August 2011 - 12:29 pm) isn't anyone off mecca close to glous?
(18 August 2011 - 12:28 pm) problem is then that till we have pics we sort of stabbing in the dark and just guessing at what the prob might be
(18 August 2011 - 12:27 pm) oops didn't see what you'd put then lol
(18 August 2011 - 12:26 pm) have you checked the battery then? if it's been in a barn for so long
(18 August 2011 - 12:25 pm) oooo deffo need a pic of that :yes:
(18 August 2011 - 12:24 pm) if nothing wrong with wires, hows the battery on the board? leakage can cause all sorts of weird things to happen
(18 August 2011 - 12:22 pm) the more the merrier..... we like pics over there
(18 August 2011 - 12:21 pm) if you take close up high res pics and put them on mecca you'd prob get to the bottom of it quicker
(18 August 2011 - 12:20 pm) my mind, or whats left of it says that it has a connection but when either reels spin or you nudge them vibration or movement is causing the prob
(18 August 2011 - 12:19 pm) may have a dry joint then or a crack in one of them, not always easy to see, thats why you need to test them
(18 August 2011 - 12:17 pm) sounds like loose wire/bad connection to me as fault moved to reel B when you changed wires over
(18 August 2011 - 12:17 pm) cleaning is always good
(18 August 2011 - 12:16 pm) try pulling each one gently by the plug to make sure they in right
(18 August 2011 - 12:16 pm) if you can't test wires then try make sure all wires are in plugs at both ends firmly
(18 August 2011 - 12:15 pm) you need to know whether there's a current through all the wires from the plug that fastens to reel and goes to the mpu
(18 August 2011 - 12:15 pm) oh that's not good then
(18 August 2011 - 12:13 pm) do you have a tester?
(18 August 2011 - 12:13 pm) i'd start by checking the wires that were originally on reel 1 (A)
(18 August 2011 - 12:13 pm) ok so that tell me the fault is with the wires and not the reels
(18 August 2011 - 12:11 pm) ok so fault moved when you changed wires over?
(18 August 2011 - 12:10 pm) u there rob?
(17 August 2011 - 07:54 am) can someone tell he how to up a file to cliffs pls, cos it won't let me :cry:
(10 August 2011 - 02:13 pm) oops was typing and didn't see duplus post :wideeyed:
(10 August 2011 - 02:12 pm) think i just did ady, well i just posted it in the thread that duplu is watching
(10 August 2011 - 02:07 pm) why do i get ... Fatal error: Call to undefined method boardIndexFusionMenu::user_popup() in /home/fecom/public_html/forums/admin/applications_addon/ips/ccs/sources/pages.php(419) : eval()'d code on line 2239 when i click on read story?
(10 August 2011 - 08:03 am) sorry but when people are getting injured and even killed, why someone would want to 'have a look' is beyond me, let the professionals deal with it and keep out of the way, the more people on the streets (whether they are doing wrong or not) the harder it is for all concerned to get it under control
(10 July 2011 - 08:13 pm) has anyone on here got a b3 machine at home with a top box on it pls?
(03 July 2011 - 06:03 pm) sent pm anyway.... hope you don't mind :D
(03 July 2011 - 05:51 pm) if i send you a pm
(03 July 2011 - 05:49 pm) nails could you answer me a cpl of questions pls?
(03 July 2011 - 05:49 pm) evening all
(29 June 2011 - 10:07 pm) does anyone know how to go into bios on a b3 machine pls?
(27 June 2011 - 11:18 pm) the sort in the 'original' cab
(27 June 2011 - 11:17 pm) hi has anyone here got a b3 rainbow riches, elvis or cashino pls
(08 June 2011 - 12:00 pm) http://www.confused....-help-903586004 Aparently only if given permission by the courts, ridiculous if you ask me, they shouldn't be there in the 1st place!
(02 June 2011 - 07:26 pm) hi todd
(02 June 2011 - 07:24 pm) evening all
(01 June 2011 - 08:40 am) if it's to the manual then i already got it, but i'm soooo confused with it :arghh:
(01 June 2011 - 08:39 am) that link not working for me m8
(01 June 2011 - 08:30 am) specifically SR5i
(01 June 2011 - 08:30 am) is there anyone one about that knows anything about Money Controls coin mechs
(01 June 2011 - 07:48 am) morning all
(19 April 2011 - 10:36 am) forget that, it let me do it now :wideeyed:
(19 April 2011 - 10:33 am) thanks
(19 April 2011 - 10:33 am) any advice pls pm me cos I can't start a thread today for some reason
(19 April 2011 - 10:30 am) so does anyone know which Sec Chip I should have in Magic 7, to enable it to run software A939 pls?
(19 April 2011 - 10:28 am) they won't talk to me anymore :realmad:
(19 April 2011 - 10:28 am) looks like i ran out of luck at electrocoin :skeptical:
(19 April 2011 - 10:27 am) morning all
(16 April 2011 - 09:46 am) no reply as yet from electrocoin tommy m8
(16 April 2011 - 09:46 am) morning all
(15 April 2011 - 09:00 am) ok m8 laters
(15 April 2011 - 08:57 am) they not been too bad actually, although the more i ask the shorter their answers seem to get :wideeyed:
(15 April 2011 - 08:54 am) never thought of that lol..... must be too honest :skeptical:
(15 April 2011 - 08:51 am) will mail them and see what i can find out, think they getting wise to me tho, cos i asked about loads of stuff and not bought owt off em yet, thanks to the mecca :biglaugh:
(15 April 2011 - 08:49 am) think ya must be right, thought it was going too well lol
(15 April 2011 - 08:47 am) any ideas how to find out what pic chip should go with the A939 software?
(15 April 2011 - 08:44 am) did you happen to see my lastest prob post over at mecca tommy, the alarm error when i put new prom in?
(15 April 2011 - 08:39 am) but i just installed IE9 and it's like WOOOOOOOOSH
(15 April 2011 - 08:39 am) morning tommy m8, i knew about the new server but it didn't make site any faster for me
(15 April 2011 - 08:34 am) morning all has anything been done to the site to make it load faster?
(17 March 2011 - 10:24 am) can only find a super ring the bell one (which i already have) but it's not the right one
(17 March 2011 - 10:15 am) is there?, i thought i'd looked there, thanks ady m8
(17 March 2011 - 10:01 am) I know spa has got a triple bell but he's not got a manual
(17 March 2011 - 10:00 am) Anyway on a lighter note.... does anyone have any idea where i might get a copy of Astras Triple Bell manual.... think i might have asked before on here but not sure... it's my age ya know :undecided:
(17 March 2011 - 09:57 am) Thanks todd..... replied
(17 March 2011 - 09:31 am) Can someone please explain what "we will not tolerate " means exactly? I ask this because rule 1 in Forum Rules reads as follows "1..We encourage debating and discussion, however we will not tolerate rudeness, insulting posts, personal attacks or purposeless inflammatory posts. To my knowledge he has done at lease three of these on numerous occasions under both names
(17 March 2011 - 08:45 am) I'm all for freedom of speech and everyone being entitled to their own point of view, but surely when all said and done there is a limit and line that shouldn't be crossed! When all someone does is take, abuse, slag people off , try and belittle the hard work of others and generally just be a pill0ck then the said line has been crossed!
(17 March 2011 - 08:38 am) Here we go again then, it's a shame the change of name didn't change his attitude at the same time!
(09 March 2011 - 10:29 am) tried em all and working fine, but will stick to basic, don't like surface and cleancut don't really seem much diff
(09 March 2011 - 10:26 am) forget that, they all there now
(09 March 2011 - 10:25 am) ok m8
(09 March 2011 - 10:24 am) not that i'm bothered, just thought i'd let ya know
(09 March 2011 - 10:24 am) i've only got basic and mobile options in drop down menu
(07 March 2011 - 09:08 pm) forget that it won't d/l
(07 March 2011 - 09:07 pm) is this any good for ya? http://www.alivetorr...1-w1ck3d-5k1llz
(28 February 2011 - 11:12 am) cya lata tommy m8
(28 February 2011 - 11:04 am) got a bit sidetracked watching this paint drying, vastly more interesting
(28 February 2011 - 11:03 am) LMFAO
(28 February 2011 - 10:54 am) me neither, had me say now just gonna ignore him
(28 February 2011 - 10:51 am) <<<<<< takes DEEP BREATH... morning tommy m8 and Darienne
(28 February 2011 - 10:49 am) Pls crawl back under the stone from whence you came and try to get a life you idiot!
(28 February 2011 - 10:47 am) all for nothing.......... you will find that if you treat ppl with respect and kindness that you usually get it returned..... all that said i just have one other thing to say to you............
(28 February 2011 - 10:46 am) i have made new friends, been helped out no end of times with all sorts of stuff and to top it off i get to play the emus which have been brilliantly made by the kind ppl on here
(28 February 2011 - 10:45 am) and in return................
(28 February 2011 - 10:45 am) right time for my 2 pennyworth...... what a load of crap, i have been on here a while now, never paid a penny, am always curteous and friendly and try to help ppl when i can (although i don't know much yet!)......
(23 February 2011 - 07:48 pm) why is nothing EVER straight forward!!!!!!!
(23 February 2011 - 06:50 pm) has any1 got an astra machine at home circa 1996 ?
(23 February 2011 - 06:50 pm) evening all
(19 February 2011 - 06:50 pm) cya m8 and thanks
(19 February 2011 - 06:48 pm) but like you said if i have 35 prom IF i decided to sell would prob get more with both proms
(19 February 2011 - 06:47 pm) wud prob make twice that in a day round here with the %'s they got stuff on
(19 February 2011 - 06:47 pm) very true
(19 February 2011 - 06:46 pm) which seems cheap considering the 1 on ebay is at 225 with a day to go
(19 February 2011 - 06:45 pm) only paid 160 for the thing in the 1st place
(19 February 2011 - 06:45 pm) ouch
(19 February 2011 - 06:45 pm) 70 version 495
(19 February 2011 - 06:45 pm) 35 version.... 295
(19 February 2011 - 06:45 pm) omfg what a rip off
(19 February 2011 - 06:45 pm) btw when you said it's not cheap did you notice the post with reply from electrocoin in it with the prices on?
(19 February 2011 - 06:43 pm) steveh said he would burn it if i got the image but so far i not got it
(19 February 2011 - 06:42 pm) just a shame i seem to have spent all week with my head inside the bloody thing
(19 February 2011 - 06:42 pm) right in that case i think i'll not bother then
(19 February 2011 - 06:40 pm) but 6=on and 7=off it what i already got it set on which is £10/£15/£25
(19 February 2011 - 06:39 pm) he said....pic chip is the one circled and is for £35, you will possibly need to get a £35 prom or its dil switches 6 and 7, if the machine is a 3 winplan try 6=on 7=off, could be £5-£10-£35
(19 February 2011 - 06:38 pm) dr slots said the security chip that's in will do 35 if i got the software
(19 February 2011 - 06:36 pm) all the settings i tried only go up to 25
(19 February 2011 - 06:36 pm) is it??????????/
(19 February 2011 - 06:26 pm) bet he comes back and says i'm a thick tw@t lol
(19 February 2011 - 06:24 pm) eprom programmer advice
(19 February 2011 - 06:23 pm) thanks m8
(19 February 2011 - 06:23 pm) i can't find anything like dr slots mentioned, or mebbe i'm looking in wrong place
(19 February 2011 - 06:22 pm) cud ya av a look at my latest post in the saga of the upgrade over at Mecca and tell me if i'm blind or mebbe just a pillock pls
(19 February 2011 - 06:20 pm) hi m8 could you do me a favour pls?
(19 February 2011 - 06:19 pm) is tommy still here?
(19 February 2011 - 06:18 pm) evening all
(19 February 2011 - 10:17 am) sorry i just seen your reply.... thanks m8
(19 February 2011 - 10:13 am) if so did you read my pm on the Mecca?
(19 February 2011 - 10:13 am) are you there captainh?
(19 February 2011 - 10:13 am) morning all
(18 February 2011 - 08:43 pm) can't believe the prices electrocoin quoted
(18 February 2011 - 08:39 pm) looks like i mite b getting an upgrade after all, if things go to plan
(18 February 2011 - 08:38 pm) hi tommy m8
(18 February 2011 - 08:38 pm) evening all
(16 February 2011 - 07:32 pm) evening all
(13 February 2011 - 10:49 am) thanks tommy m8, that works fine, dunno what was wrong with link i had in favs
(13 February 2011 - 10:32 am) morning all, has something happened to cliffs? i just keep getting page has been moved
(25 January 2011 - 08:51 am) is there anybody there ?
(25 January 2011 - 08:32 am) and could poss do me a favour?
(25 January 2011 - 08:32 am) is there any1 about thats also a member at the mecca pls???
(25 January 2011 - 08:32 am) morning all
(24 January 2011 - 05:07 pm) hi all, is any1 else having probs signing into mecca pls?
(26 November 2010 - 09:10 pm) evening all
(22 November 2010 - 06:40 pm) evening all
(15 November 2010 - 09:35 pm) hi mikey
(15 November 2010 - 09:33 pm) got my 2nd real machine last night
(15 November 2010 - 09:32 pm) don't remember it being THAT bad when i registered
(15 November 2010 - 09:30 pm) i only got 1 coupon don't think i'll bother anymore
(15 November 2010 - 09:26 pm) rant over lol
(15 November 2010 - 09:26 pm) disgusting if you as me!!!
(15 November 2010 - 09:26 pm) seeing as it's a freefone number looks like they be getting a call in the morning
(15 November 2010 - 09:25 pm) kelloggs website say in the event a retailer won't accept the coupon ring there helpline
(15 November 2010 - 09:22 pm) and i'm NOT even SCOTTISH lmfao
(15 November 2010 - 09:20 pm) the north pole
(15 November 2010 - 09:19 pm) what is it with tesco, they sell kelloggs stuff with claim a free box of cereal codes on them, then when you get enough codes for a free box and print the coupon they WON'T accept it
(15 November 2010 - 09:18 pm) evening all
(14 November 2010 - 11:22 pm) is there anyone technical about pls?
(14 November 2010 - 11:22 pm) evening all
(26 August 2010 - 05:41 pm) yeah, will do that m8, and u rite about up lata etc, thanks for the help and advice
(26 August 2010 - 05:30 pm) that's the only thing diff in the house so unless elec meter faulty can't see that it's anything else
(26 August 2010 - 05:29 pm) only had the machine 3 weeks and loads of elec used, but haven't kept a check on it recently so wasn't sure if it was bandit or not
(26 August 2010 - 05:28 pm) thanks fruitman..... just wondering why my elec bill is now dbl the usage for this time last year
(26 August 2010 - 05:11 pm) evening all does any1 know roughly how much electric a bandit uses pls?
(17 August 2010 - 08:11 am) or better still a real one that they no longer need
(17 August 2010 - 08:07 am) morning all, has anyone got a pic of the percentage decal (the little 1 by the coin entry slot) pls (red gaming 70% to (98%)
(06 August 2010 - 08:31 pm) ok m8 no worries i start a thread and see if any1 can help
(06 August 2010 - 08:29 pm) but they aren't ACTUALLY switches
(06 August 2010 - 08:29 pm) in bottom r/h corner of mpu5 theres 8 wires sticking out and it says switches just to thr right of em
(06 August 2010 - 08:28 pm) i found bank 2 but can't find bank 1
(06 August 2010 - 08:28 pm) it says in manual and in back of machine switch bank 1 is found on mpu5 and bank 2 on programme card
(06 August 2010 - 08:24 pm) sorry was just trying to take a pic but can't get close enough
(06 August 2010 - 08:20 pm) ok m8 will do, and thanks
(06 August 2010 - 08:18 pm) i thought they shud be bottom r/h corner but all i can see are bits of wire sticking str8 out but no actual switches
(06 August 2010 - 08:17 pm) i can't find bank 1 switches on mpu5
(06 August 2010 - 08:16 pm) i'm prob being thick here but.......
(06 August 2010 - 08:16 pm) have u got a min m8 pls?
(06 August 2010 - 08:13 pm) hi ady
(06 August 2010 - 07:50 pm) has any1 got time to give me a bit of help in chat pls regarding bank 1 switches?
(06 August 2010 - 06:00 pm) evening all, does anyone know if reds 'Fruits U Sir' is a clone of something else?
(05 August 2010 - 05:05 pm) lmao
(05 August 2010 - 05:05 pm) just wasn't sure why it wasn't clickable m8, but i done post now and it's worked
(05 August 2010 - 05:03 pm) cheers todd
(05 August 2010 - 05:02 pm) ok so i'm now sat here like a beetroot..... what a pi**ock
(05 August 2010 - 05:01 pm) ahhhh
(05 August 2010 - 05:00 pm) if you see what i mean
(05 August 2010 - 05:00 pm) unless it won't till i actually posted the post
(05 August 2010 - 05:00 pm) i done that but it not showing like a link usually does......
(05 August 2010 - 05:00 pm) thanks todd lol
(05 August 2010 - 04:57 pm) evening all, in order to make myself look like a complete dik can someone tell me how to put a link to an ebay page in my post pls
(02 August 2010 - 10:51 am) thanks bill
(02 August 2010 - 09:53 am) does anyone know what this machine is called pls http://cgi.ebay.co.u...E:B:WNA:GB:1120
(22 July 2010 - 02:18 pm) if it's there you'll need ID to collect it
(22 July 2010 - 02:17 pm) if he didn't chances are it was never posted in the 1st place
(22 July 2010 - 02:17 pm) postman shud have left you a card saying so
(22 July 2010 - 02:16 pm) rob it usually goes to your local sorting office
(22 July 2010 - 02:16 pm) hmm wonder why my last shout didn't come up?
(16 February 2010 - 06:21 pm) evenin all, nice new look, but i have a question..... is it just me or is shout goin the wrong way, ie new shouts are seen at bottom of shout and not top?