Jump to content


Photo
- - - - -

How to RAM clear a MPU 5 please


  • Please log in to reply
No replies to this topic

#1 jackpotjon05

jackpotjon05

    Advanced Member

  • Regulars
  • 401 posts

Posted 19 January 2018 - 04:49 PM

Hi all, hope everybody is well.

 

Can anyone please advise how to RAM clear my MPU 5 on a Party Animal please?

 

Reason I want to clear is because when machine sits still on attract mode, whilst not in play every single lamp is lit up like a Christmas tree and stays fully lit permanently.

 

Is there a dip switch to disable this, as I'm sure the machine is supposed to flash up/down and all over the place or would it be advisable to ram clear and hopefully clear a fault?

 

All advice greatly appreciated.



#2 Mavroz

Mavroz

    odd job man...

  • Layout Creator
  • PipPipPip
  • 882 posts

Posted 19 January 2018 - 05:24 PM

You can either try another Rom card in the machine then put your party animal one back, if that doesn't work you need a ram cleardown card.
There are ways to do it removing the battery but that may cause more issues that have caused many problems.

#3 nails

nails

    The furniture

  • Regulars
  • 4578 posts

Posted 19 January 2018 - 05:25 PM

i would say its a dip switch for attract mode, RAM clear wont help.

 

take a note of the settings and have a play!



#4 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 19 January 2018 - 07:10 PM

zero credit animation. is turned on no movement in attract mode, Ram clearing would not sort this this is done on a dill switch (ZCA).


.._-=It`s not a problem only a challenge =-_..

#5 rexer

rexer

    Newbie

  • New Members
  • 29 posts

Posted 22 January 2018 - 01:31 PM

Put it in to test mode and you can check what switches are on or off, as above, one of them puts it in to attract mode as far as i can tell



#6 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 22 January 2018 - 04:56 PM

It dont put it in attract. We written it into the software as LBO mode


.._-=It`s not a problem only a challenge =-_..




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users