Jump to content


Photo
- - - - -

Barcrest Vamp it Up


  • Please log in to reply
14 replies to this topic

#1 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 05:16 PM

I have just put a new MPU5 board in my Vamp It Up fruit machine 

 

But the fault is still there, I think I need to order a new Program Module

 

I have had a look on the usual web sites E-bay etc and I can find the boards but non with Vamp it up on 

 

Can anyone advise where I could get a new one from 

 

Thanks

Rob

 

 



#2 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 05:28 PM

What is the fault?

#3 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 05:39 PM

When I plug it in it says something like "Check It Out"

 

When I look inside the red light flashes. 3 times and the green light flashes 6 times, I have checked online it says for that sequence it means 

"no characteriser"

 

I spoke to someone at a company called E-Service and they said a new MPU5 board should sort it

 

I have just put a new board in and its the same thats why i can only thing it needs a new program module

 

Rob



#4 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 06:35 PM

That is a chip that needs to match the software.
You should be able to see it, it will have a 4 digit code on it.

#5 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 07:25 PM

I am not sure what number you mean i have taken a picture of the board is it one on there 

 

 

 

Attached Files

  • Attached File  231.JPG   267.07KB   0 downloads
  • Attached File  232.JPG   191.78KB   0 downloads


#6 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 07:30 PM

The one with 105VAMP is chr



#7 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 07:37 PM

So is it just that chip that need to be replaced is that the one that has the program on it 

 

I am a novice to all this chip buisness 



#8 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 07:39 PM

The software wont boot without that chip working.

Only problem you have is them chips cant be copied.

best to look out for new game card.



#9 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 07:50 PM

the machine I have is Vamp it up 

 

Will any other cards work in that machine or does it have to be specifically that one



#10 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 08:05 PM

Have you had machine working before or did you get it like that?.

#11 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 08:12 PM

It was working for ages, I turned it off ans it was off for about 12 months, when i turned it back on it worked for a while and then whilst I was using it, it suddenly started shouting "Check it out" and wouldn't do anything 

 

I asked the question on here and someone said it could be the battery in the MPU5 board and if i changed this board it may do the trick

 

So i bought a new board and put it on today but still the same problem 



#12 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 08:14 PM

Your going to need a vamp it up game module with all the chips in by the looks of it.



#13 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 08:16 PM

Do you have any idea where or even if I can get one of them from 

 

Been looking all day and cant find one 



#14 richy1976

richy1976

    Part of the furniture

  • Bronze Supporters
  • 1792 posts

Donator

Posted 17 November 2017 - 08:18 PM

Not got one mate.

Does it say alarm 52-36 on the display.

Your just going to have to keep eye out for one.



#15 rob s

rob s

    Newbie

  • New Members
  • 21 posts

Posted 17 November 2017 - 08:24 PM

on the display it just says AL 

 

thanks anyway mate 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users