How can I fix this on mfme without clearing the ram?
coin mech error 10
5 replies to this topic
Posted 08 November 2017 - 11:02 am
It would help if you named the machine as there are thousands emulated.
Posted 08 November 2017 - 04:39 pm
There are several Crazy Fruit layouts, but make sure the coin mech is set to binary first.
Open the layout, click on design, edit mode. Then click on configuration on the top menu bar and on that page make sure it is set to binary, not parallel.
You need to reload the layout, say yes to save changes. When it loads back up it may still err, but it should clear after less than 30 secs. Try putting in another coin, if the error message still shows.
Posted 08 November 2017 - 06:04 pm
If it worked then that's good, but the coin mech should really be set as Parallel NOT binary as I said above. It will depend on how you have the coin mech set up in the layout.
It's all to do with the options, that MFME v5.1 has, that MFME 9.4/10.1, that these layouts were originally created for didn't have.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users